This page was exported from Exams Labs Braindumps [ http://blog.examslabs.com ] Export date:Fri Nov 22 12:39:02 2024 / +0000 GMT ___________________________________________________ Title: [Q53-Q74] 301a Certification - The Ultimate Guide [Updated 2022] --------------------------------------------------- 301a Certification - The Ultimate Guide [Updated 2022] 301a Practice Exam and Study Guides - Verified By ExamsLabs For more info read reference: F5-301a Official Certification Site Exam policies and FAQs   NO.53 The web application team requests help from the LTM Specialist to Improve the performance of their web sites that are load balanced by the F5 LTM device with a Standard Virtual Server.Which virtual server type will improve the performance of the web application servers?  Performance (HTTP)  Performance (Layer 4)  Stateless  Forwarding (IP) NO.54 in which Application Visibility and Reporting (AYR) profile must the SMTP profile be defined to configure notifications via email?  App analytics profile  virtual server profile  custom analytics profile  default analytics profile NO.55 In an iApp, which configuration protects against accidental changes to an application Services configuration?  Components  Strict Updates  Name  Template NO.56 Exhibit.– The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)– LTM3 and LTM4 are configured in Device Group Y (Sync-Only)– An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.– Device GROUP X has four Traffic Groups A, B, C and D configured.– Device Group Y has four Traffic Groups E, F, G, and H configured– Auto Fallback IS NOT Enabled.– Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.What is the state of each Traffic Group on each ITM device after power is restored?A)B)C)D)  Option A  Option B  Option C  Option D NO.57 What should the LT’M Specialist add to the virtual server?  one Stream profile and an iRule with the command of STREAM expression (@http:// @https:// @@internalapp@publicapp@)  two Stream profiles and an iRule with the command of STREAM expression (@http:// @https:// @@internalapp@publicapp@)  one Stream profile with the expression of @http:// @https:// @  Two Stream profiles, one profile for each rewrite requirement NO.58 An LTM Specialist needs to configure a setup for antivirus scanning of HTTP traffic with an internet Contact adaption Protocol (ICAP) server.Which two server type should be used? (Choose two.)  Standard  Internal  Performance HTTP  Forwarding IP  Stateless NO.59 A Client makes the request displayed below to the application server.Which virtual server type should an LTM Specialist use to load balance based on the URI?.  Forwarding (Layer 2)  Stateless  Standard  Performance (Layer 4) NO.60 Refer to the exhibit.The http monitor is applied to a pool. All members are enabled. One server responds as follows.What is the resulting status of this poo! member?  Offline (Disabled)  Offline (Enabled)  Unavailable (Disabled)  Available (Enabled) The first picture “Send String” and “Receive String” are not clear. Send String should be “GOOD”, the response packet does not contain this keyword. Receive Disable String is completely unclear. If the response packet contains the content of Receive Disable String at this time, it will be Available (Disabled), If the content of Receive Disable String is not included, then Offline (Enabled).NO.61 Two LTM devices must be manually configured to restrict in the same Device Group.What is the correct order of steps to meet this requirement?  Configure VLAN, Configure-Sync IP, Configure Failover type, Establish Device Trust, Sync Device Trust, Create type, Establish Device Sync Device Trust, Create Device Group.  Configure VLAN, Configure Self-IPs, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group.  Configure Self-IPs, Configure VLAN, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group  Configure VLAN, Configure Config-Sync IP. Configure Self-IPs. Configure Failover type. Establish Device Trust, Create Device Group NO.62 An LTM Specialist needs to configure a virtual server with the requirements displayed below.Application is currently an internal HTTP applicationEncrypted external user accessLinks are hard for siteA example.com and need to rewritten to siteB.Example.com Which profiles must the LTM Specialist use to provide the proper functionality?  Clientssll, Stream  Serverless, Stream  Clientssl, fastL4, Stream  Serverless, fastL4, Stream For http application and external encryption, clientssl is required, and if the message content needs to be modified, the steam profile is required. FastL4 profile cannot coexist with clientssl and stream.NO.63 Where does a LTM Specialist view all of the objects that are part of a deployed iApp?  iAPP> Application Policy > Objects  Local Traffic . Virtual Servers > Applications  IAP > Application Service > Components  Local Traffic > Network Map > View Map NO.64 An application requires load balancing functionality. The application must be encrypted to the client.Certain content must be manipulated by the following IRule:Which set of profiles must be applied to the virtual server?  TCP, HTTP server SSL Stream  TCP, HTTP, Client SSL, Stream  TCP, HTTP, OnceConnect, Stream  Fast L4, HTTP server SSL Stream Client encryption is required , clientssl, irule contains HTTP events and stream execution, http profile stream profile.NO.65 Exhibit.An LTM Specialist needs to configure VS^HTTP and VS_DB for an online shopping site. The VS HTTP passes the client requests to the webservers. The webservers query the database servers through the VS_DB. Initially, the LTM Specialist finds the database servers directly return the packets to the webservers.which setting must be enabled for the configuration to function correctly?  VS_HTTP snat auto map  VS.HTTP auto last hop  VS DB auto last hop  VS_DB snat auto map NO.66 Remote office users are having performance issues with a virtual hosted on the F5 LTM. The LTM Specialist reviews the configuration for the virtual server and determine that some settings are set with default profiles.Which profile should the LTM Specialist enable to improve virtual server performance?  A WAN optimized client side profile  A FastL4 profile on the virtual server  An HTTP profile for the virtual server  A Stream profile for the remote user networks They key word is that there are performance problem with Remote office users, no F5. The user experience can be improved through tcp optimization. The expression should be wom-tcp-wan-optimized in Protocol Profile (Client)NO.67 An LTM Specialist needs to force only FTP traffic, sourced from subnet 10.10.10.0/24 to virtual server 10.10.20.1 to the new FTP1 server. The following virtual servers are configured on the LTM device:Traffic sourced from 10.10.10/24 must use the specific pool member for load balancing.Which configuration change is needed to meet the requirements?  Create a new virtual server for traffic sourced from 10.10.10.0/24 on port 80 that is destined to 10.10.20.1/32, and create a new pool has only the pool member FTP1 defined.  Add FTP1 to the pool assigned to the MyVS4 virtual server, and remove all other pool members from the pool.  Create a new virtual server for traffic sourced from 10.10.10.0/24 on traffic sourced from 10.10.10./24 on port 21 that is destined to 10.10.20.1/32, and create a new pool that has only the pool member FTP1 defined.  Add FTP1 to the pool assigned to the MyVS2 virtual server, and remove all other pool member from the pool. According to the VS matching order, first match the destination host IP, then match the destination port and finally match the source network segment. In the current network configuration, 10.10.10./24 access to 10.10.10.20.1 will hit MyVS2. If there is no error in the title, subnet 10.10.10.0 to virtual Server 10.10.20.1 to the FTP1 server,” Is to distribute all traffic from 10.10.10.1 to FTP1, then D That’s right.NO.68 An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)  configure a serial failover cable for mirror traffic  configure a OneConnect profile to mirror connections  configure a VLAN and primary mirroring address for mirror traffic  enable Mirroring for a virtual server and persistence profile  enable Clone Pools for a virtual server and a persistence profile NO.69 A custom TCP application using a single server is being migrated to the LTM device. A server is being added to the pool. The application is known to violate the TCP protocol RFC. The application currently works without error from a user perspective.Which virtual server type is appropriate in this situation?  Stateless TCP protocol is not applicable  Performance (Layer 4)-pure layer A forwarding  forwarding (Layer 2) pure routing forwarding, pool cannot be specified  Standard-tcp profile exists, RFC verification will be performed NO.70 A pool has four members. Ail of the servers have been designed and configured with the same application. Each client’s request can significantly the performance of the servers.Which load balancing method should the LTM Specialist use to maintain a relatively even load across all servers?  Least Connections  Priority Group  Ratio  Observed NO.71 An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.What is an appropriate SNAT configuration in this situation?  A SNAT pool with 4 IP addresses  SNAT automap enabled  A static SNAT  A SNAT pool with IP addressExplanationOne IP can establish 65,535 connections only the number of snapit’s IP exceeds 100,000. AT least two snaptips are required. Options B, C, and all have only IP, which is obviously not enough NO.72 A company plans to launch a huge marketing campaign and expects increase demand of their secure website. With the current virtual server setup, the LTM Specialist expects that the LTM device will reach its capacity limits. For the wen application to function properly. Cookies persistence is required. The LTM Specialist needs to reduce LTM device load without breaking the application.Which two settings should the LTM Specialist modify to meet the requirement? (Choose two.)  Remove HTTP compression profile  Remove HTTP profile  Remove web acceleration profile.  Modify virtual Server type to performance (Layer 4)  Remove ClientSSL profile It is required that cookie persist must be used and http profile must be used, and SSL offloading must also be required. It must be in standard mode, excluding BD E.NO.73 An LTM Specialist needs to upgrade all guests on a Viprion eight CMP guests.What is the maximum number of guests that the LTM Specialist should upgrade at once?  Eight  One  TWO  FourExplanationEach guest is independent, just like hardware upgrades. Can only upgrade one by one, there is no way to upgrade at the same time. NO.74 An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled.TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool.TLS enabled virtual servers utilize certificates based on 2048-bit keys During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.What will happen in this scenario?  560 new TLS transactions will be silently discarded due to the SSL TPS license limit  Nothing: TLS transactions per second are NOT affected by an SSL TPS license limit  2060 new TLS transactions will be silently discarded due to the SSL TPS license limit  Nothing: 2560 TLS transactions per second is within the SSI TPS license limit.  Loading … F5 301a Exam Syllabus Topics: TopicDetailsTopic 1Given a scenario determine the steps required to maintain SSL certificates Given a scenario, determine the minimum profiles for an applicationTopic 2Determine the effect of LTM features andor modules on LTM device performance andor memory Explain the effect of configuration options and resource health on load balancing decisionsTopic 3Given an iRule functionality, determine the profiles and configuration options necessary to implement the iRule Given an expected traffic volume, determine the appropriate SNAT configurationTopic 4Explain how to configure remote authentication and multiple administration roles on the LTM device Distinguish between the management interface configuration and application traffic interface configurationTopic 5Determine the appropriate LTM device security configuration to protect against a security threat Given a scenario, determine the appropriate monitor type and parameters to useTopic 6Given an application configuration, determine which functions can be offloaded to the LTM device Given a scenario, determine the appropriate load balancing method(s)   Ultimate Guide to the 301a - Latest Edition Available Now: https://www.examslabs.com/F5/LTM-Specialist/best-301a-exam-dumps.html --------------------------------------------------- Images: https://blog.examslabs.com/wp-content/plugins/watu/loading.gif https://blog.examslabs.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-04-19 09:21:20 Post date GMT: 2022-04-19 09:21:20 Post modified date: 2022-04-19 09:21:20 Post modified date GMT: 2022-04-19 09:21:20