1Z0-1045-21 Certification - Valid Exam Dumps Questions Study Guide! (Updated 72 Questions) [Q42-Q61]

June 24, 2022 1Z0-1045-21, Oracle 0 Comments

1Z0-1045-21 Certification – Valid Exam Dumps Questions Study Guide! (Updated 72 Questions) [Q42-Q61]

Rate this post

1Z0-1045-21 Certification – Valid Exam Dumps Questions Study Guide! (Updated 72 Questions)

1Z0-1045-21 Dumps are Available for Instant Access using ExamsLabs

NO.42 Consider that in your company you are handling lot number tracking of items.
Which two statements are true regarding lot management? (Choose two.)

Once can allocate the Inventory against the lot number during waving against an Outbound Order.

After performing the Putaway of an IB LPN, which is having the lot number, the lotnumber will not be transferred to the Active location.

A received IBLPN can have multiple lot number-tracked SKUs with different lot number inventory at any point of time.

A batch number in the Batch Management UI has to be always linked to an expirydate.

NO.43 Select the two data formats supported by Oracle WMS Cloud with its built-ininterfaces and APIs. (Choose two.)

JSON

Delimited Flat File

EDI

XML

pdf

NO.44 Which five combinations of lot and expiry date are valid scenarios in WMS Cloud? (Choose five.)

Two IB LPNs of the same item have different lots and the same expiry dates.

Two IB LPNsof the same item have the same lot and the same expiry date.

The IB LPNs have an item with the same lot and different expiry dates.

An item is lot-tracked but not expiry-date-tracked.

An item is expiry-date-tracked but not lot-tracked.

Two IB LPNs of the same item have different lots and different expiry dates.

NO.45 A user is using the PackNC transaction to pack into a blind OBLPN. The user needs to pick up 10 units for Item 000234, but after picking up four units the OBLPN is full.
What should the user do?

move to the next location

end the LPN

short the remaining units

scan the next order

NO.46 Select the two routing configurations thatare used to specify routes for outbound loads. (Choose two.)

the Routing Mode on the Carrier UI Screen

the company parameter PACKING_ROUTING_MODE

the Routing Mode on the Wave Template

the Routing_Mode parameter on the Loading RF Transaction

NO.47 You are the Inventory Control Supervisor at your employer’s East Coast facility. Your employer is a 3PL, and your customer is a large company that is also serviced out of the other 3PL facilities. As you start the shift, your Inventory Control team members inform you of a significant change in the RF Cycle Counting process.
Lost IBLPNs are now updates with a “00” lockcode rather than the expected “LL” code.
Which scenario is causing this issue?

You dismiss the concern because a change in the lock code has no impact on either the WMS Cloud or host inventories.

Your counterpart at the 3PL’s other facility changed one of the cycle counting company parameters and that impacted your workflow for that same company.

An inventory team member in the other facility marked a lost case with “00” lock code causing all subsequent lost cases to be defaulted to the same code across all LPNs for all company/facility combinations.

While counting LPNs at a location, one of your team members marked a lost case with the new lock code.
The new lock code is stored in system memory and applied to all IBLPNs counted as “Lost”.

Oneof your inventory team members changed his/her RF parameter default lock code causing the same configuration change to propagate to all users in the facility.

NO.48 The customer wants to change the items and quantities on an existing order in the WMS Cloud.
Identify the method they can use to achieve this.

The customer maysend a “Cancel Order” transaction via integration just before the order is shipped.

The customer may send a replacement order by sending a new order and referencing the original order in the “Order Number to Replace” field prior to shipping of the original order.

Once the order is Shipped Confirmed, the customer may adjust the items and quantities via their maps.

The customer may change the items on the Order in the UI at any order status.

The order cannot be changed and must be processes as is.

NO.49 In WMS Cloud, which two statements are true about WMS BI Cloud? (Choose two.)

WMS BI Cloud is availablefor use out of the box

WMS BI Cloud allows users to create reports by creating SQL queries

Tables in WMS BI Cloud are referred to as categories

By default, the WMS BI Cloud functionality is disabled

NO.50 Item X has product life as 40 days and % Acceptable as 40%. You are doing receiving for your company via RF and today is Sep. 15th, 2017. The receiving transaction that you use to receiveItem X has left the screen parameter allow-rem-exp-override blank, and has the screen parameter allow-inv-exp-override set to on.
Identify two valid facts. (Choose two.)

When you communicate to the RF that the expiry date of Item X is Sep. 30th, 2017, the system will allow you to receive it.

When you communicate to the RF that the expiry date of Item X is Oct. 25th, 2017, the system will allow you to receive it.

When you communicate to the RF that the expiry date of Item X is Oct. 10th, 2017, the system will allow you to receive it.

Expiry date is the only date value that you can enter via receiving transactions, but it is optional based on the items configuration.

When you communicate to the RF that the expiry date of Item X is Oct.20th, 2017, and there’s an existing inventory of Item X whose expiry date is Oct.4th, the system will allow to receive it.

NO.51 Your customer wants to store the inventory to Active and Reserve locations after receiving. Inventory is received in cases pack quantity and assigned to an IBLPN. Inventory is categorized to Bin Shelves and Bulk flow items and the items dimensions are available in WMS Cloud.
Which three putaway configurations are required to meet this? (Choose three.)

Locations Size type and Item Putaway item should be configured prior to Putaway

Putaway rule overrides Putaway priority and selects the location based on the item dimension

Putaway rule will act according to the Priority defined.

This is not supported in WMS Cloud.

Selection Criteria will evaluate and apply the Putaway priority.

Putaway priority will drive the location selection.

NO.52 You have hired a new employee to do picking in the warehouse. The employee complains that he/she cannot work because the RF Picking transactions is notdisplayed as one of the RF options.
Which two scenarios will cause the transaction to be missing as an RF option in the user’s menu? (Choose two.)

The RF Picking transaction is not associated with her/his group’s assigned RF Menu.

The employee’s Group has a blank RF Menu.

The employee is assigned to the “Supervisor” group.

The employee’s email is not set up in his/her user profile.

The employee has forgotten his/her password.

NO.53 Which statement is true regarding Replenishment Rules?

Replenishment Rules created at Parent company view can be edited at Child company view.

Replenishment Rules are used for defining Wave Template.

Replenishment Rules areused for Inventory movement between two warehouses.

Replenishment Rules are only editable at the company level in which it was created.

NO.54 What happens behind the flag Onlydeallocate on Shortin the order typescreen?

The Order Type has no impact on the Picking Process.

When the parameter is set to YES, during short pick, the system will put the order hold status until more inventory is available.

When the parameter is set to Yes, then only the shortedquantity will get deallocated form the order.

When the parameter is set to No, the shorted quantity on the order remains in the “allocated” status.

When the parameter is set to Yes, the short pick will cancel the shorted order line automatically and inventory adjustment will be generated for the item.

NO.55 Which two packing transactions do not require you to open up an IB LPN (Everything will go in the box)?
(Choose two.)

Pick Cart Transaction

Distribution Transaction

PackNC Transaction

PackLPN Transaction

NO.56 When creating an Appointment, which three “Matching value type” selections can be used to create the Appointment? (Choose three.)

License Plane Nbr

Load Nbr

Dock Door

PO Number

AdvanceShipment Notification

Trailer Nbr

NO.57 Which three configurations are required to sort the SKU A and B while receiving? (Choose three.)

An IB Shipment Type should be created to receive Purchase Order with sort SKUs.

Use Custom Field in Vendor UI to map the item that needs to be sorted.

BreakRule with Criteria needs to be set for the Sorting Rule.

Receive Station Location for Sorting should be created and mapped with the Sorting Rule.

Putaway Type should be configured for the SKU.

The Locations Size type should be defined for eachReceive Station Location.

NO.58 Identify three valid statements related to IB Sorting. (Choose three.)

IB Sorting can be done by Manual and System driven method

IB Sorting is done after Putaway

IB Sorting will group SKUs with different Putaway typeand build in a single pallet

IB Sorting is done before Putaway

IB Sorting is done based on Putaway Priority.

NO.59 Select two true statements about Group Configuration.(Choose two.)

Only the RF Menu uses the concept of Groups

Users can assign specific access to activities by using Group permissions

Permissions come already pre-assigned to standard Groups in the system and cannot be changed

Users must log outwhen switching Groups

User can belong to multiple Groups

NO.60 Identify two scenarios in which the user can select the “Release Pick Info” option in the Wave Inquiry UI togenerate the wave information for MHE systems. (Choose two.)

after wave picking has started for all allocations (alloc_qty>packed_qty, but packed_qty>0)

if all the lines are picked (if allocations packed qty=alloc qty) for all the allocations

after wave picking has started, but some allocations have not been picked yet (allocations having packed_qty=0)

packed_qty not evaluated when sending Wave Pick Info

if picking has not started for the wave

NO.61 Your client wants to create an Advanced Shipment Notification (ASN) automatically after a Purchase Order (PO) is created in the system.
What stepshould they perform?

The user needs to go to the Purchase Order Screen UI and select the “Create IB Shipment” check box

Update the Company Parameter CREATE_ASN_FOR_EACH_PO to Yes on the Company Parameter UI screen

When interfacing the PO, the “create_asn” check box needs to be selected every time

When interfacing the shipment, the PO number should be specified