This page was exported from Exams Labs Braindumps [ http://blog.examslabs.com ] Export date:Thu Nov 21 16:54:15 2024 / +0000 GMT ___________________________________________________ Title: [Jun-2022] Dumps Practice Exam Questions Study Guide for the 5V0-22.21 Exam [Q46-Q69] --------------------------------------------------- [Jun-2022] Dumps Practice Exam Questions Study Guide for the 5V0-22.21 Exam 5V0-22.21 Dumps with Practice Exam Questions Answers NO.46 A vSAN administrator is troubleshooting poor performance of vSAN cluster while vCenter is not available. The vSAN administrator decides to use a command line tool to monitor real-time vSAN IOPS, throughput, and other metrics on ESXi host.Which command line tool should be used?  vimtop  esxcli  esxcfg  vsantop NO.47 In a 2-node vSAN cluster, one node has recovered from failure with FTT=1 and RAID-1 storage policy.Refer to the exhibit:What is the total VMDK storage consumed?  150 GB  100GB  133GB  200GB NO.48 Which two actions are recommended when adding a host to a vSAN cluster? (Choose two.)  Disable vSphere High Availability (HA).  Create uniformly-configured hosts.  Reference the VMware Compatibility Guide.  Disable vSphere Cluster Services (vCLS).  Disable vSAN performance service. NO.49 A vSAN administrator is tasked to perform an upgrade of a vSAN cluster from 7.0 to 7.0 U2, including firmware and drivers for its hardware. The vSAN administrator already created an image using vSphere Lifecycle Manager (vLCM).Prior to selecting Start Remediation, which step should be taken to upgrade the complete vSAN cluster as a single task?  Select Remediate All through vLCM to upgrade all hosts in the cluster.  Manually remediate one host at a time in the vSAN cluster.  Place all hosts in the vSAN cluster into Maintenance Mode.  Stage the upgrade of the vSAN cluster through vLCM. NO.50 A vSAN administrator has been asked to encrypt all traffic for data and metadata across all hosts in a vSAN cluster.Which action is necessary to achieve this level of encryption?  Enable vSAN Cluster level encryption via Storage Policy. No KMS is required.  Enable vSAN Data In-Transit encryption at the cluster level. No KMS is required.  Deploy KMS server, and enable vSAN Data at Rest encryption at the cluster level.  Deploy KMS server, and enable vSAN Data at Rest and In-Transit encryption at the host level. NO.51 A vSAN administrator observes that the VMware Skyline Health: Time Synchronization displays one host that is noncompliant.What is the meaning of this message?  The vSAN administrator must review the NTP server configuration on vCenter Server and the ESXi hosts.  The vSAN administrator must put the noncompliant host into maintenance mode.  The value of the CLOMRepairDelay parameter is incorrect.  The noncompliant host cannot communicate with vCenter. NO.52 A vSAN administrator has been tasked with troubleshooting an application in a Hybrid vSAN environment. The application is I/O intensive, and the magnetic capacity devices may be playing a role in slow performance, so the administrator decides to take action to help resolve the problem.Which action should the administrator take?  Change the Default Storage Policy to have stripe width of 13.  Modify the stripe width for the application on the advanced settings for the VM.  Add more magnetic capacity devices in the affected host.  Increase the stripe width based on the number of capacity devices within the disk group. NO.53 A newly deployed vSAN cluster runs vSAN 7.0, and the vSAN cluster needs an integration with a third-party software solution. The software solution provides full app-level redundancy, and it runs on the vSAN Data Persistence platform.The administrator configures vSAN Direct Configuration to integrate the third-party storage with vSAN and now needs to configure a storage policy to make sure the vSAN Direct storage is used by the vSAN Data Persistence platform third-party software solution.Which type of storage policy configuration should the administrator use?  A storage policy with tag or capability-based rules for vSAN Direct  A storage policy with capability-based rules for third-party storage  A vSAN shared nothing policy with no data redundancy (FTT=0)  AvSAN storage policy with one failure to tolerate (N 1=1) NO.54 Which two conditions should be verified before removing an ESXi host from a vSAN cluster? (Choose two.)  Resyncs are running  Data evacuation is complete  Performance Service is disabled  Encryption is disabled  ESXi host is in maintenance mode NO.55 The cluster level backend IOPS performance graph shows a higher-than-average number of IOPS for back-end storage.What is a possible reason for this situation?  Data ^synchronization is in progress.  DRS is invoking multiple vMotion migrations.  There is VM storage I/O traffic.  Not enough capacity for slack space is on vSAN datastore. NO.56 When viewing the VMware Skyline Health: vSAN Object Health report, the vSAN administrator observes that the link “Repair Objects Immediately” is enabled.What is the meaning of this message?  One or more objects have absent components.  Immediate action must be taken to effect object repair.  One or more objects have become inaccessible.  The repair delay timer has elapsed, and ^synchronization has begun. NO.57 An administrator has deployed a development VMware vSAN 7.0 U1 cluster. It will be used by the development teams to deploy a mixture of cloud-native stateful applications alongside a combination virtual machine and Kubernetes workloads.Which vSAN feature should be configured for the vSAN Data Persistence platform (vDPp)?  vSAN Cloud Native Storage  vSAN File Services  vSAN with Shared Nothing Architecture (SNA)  vSAN Direct NO.58 A vSAN administrator was presented with 30 additional vSAN ReadyNodes to add to an existing vSAN cluster. There is only one administrator to complete this task.What is the fastest approach?  Use a Host Profile that was extracted from an existing host.  Clone the ESXi boot partition to all new hosts, since the hardware is identical.  Run vim-cmd to capture, and apply the configuration from an existing host.  Launch Quickstart to Add Hosts to a vSAN Cluster NO.59 Which two prerequisites are required before a vSAN administrator is able to use the vSAN Performance Diagnostics feature? (Choose two.)  The vSAN Performance Service must be enabled.  The vSAN Health Service must be turned on.  vSAN File Services must be disabled before running vSAN Performance Diagnostics.  Participation in the Customer Experience Improvement Program (CEIP) must be enabled.  Verbose Mode must be enabled when configuring vSAN monitoring. NO.60 An administrator will be performing a rolling upgrade of a vSAN cluster over the weekend. In preparation, the administrator runs the Data Migration Pre-Check.Which two items are being checked? (Choose two.)  vSphere HA state  Object compliance and accessibility  DRS settings  Affinity rules  Cluster capacity NO.61 During yesterday’s business hours, a cache drive failed on one of the vSAN nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive.Which set of steps should the vSAN administrator take?  Remove the existing vSAN disk group, and physically replace the device. Then, check to verity that the ESXi host automatically detects the new device. Afterwards, manually recreate the Disk Group.  Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.  Physically replace the failed cache device, and vSAN will automatically allocate the storage. Then, rebalance the cache layer.  Place the disk group into maintenance mode, and select Full Data Migration. Then, physically replace the failed cache device. Afterwards. vSAN will rebuild the disk group automatically. NO.62 A business unit requires proprietary data to be protected against a site failure while using the least amount of storage and the least amount of nodes. AN administrator plans to implement a vSAN Stretched Cluster with a RAID-5 policy.What is the minimum number of data nodes across all sites in this vSAN Stretched Cluster configuration?  4  8  12  6 NO.63 The objects on a 4-node vSAN cluster are assigned a RAID-5 policy. A network outage occurs, causing host one to lose connectivity with the rest of the cluster. Seventy-five minutes have elapsed.What is the health state of the objects?  Reduced availability with no rebuild  Non-availability related incompliance (non-compliance)  Reduced availability  Reduced availability with no rebuild – delay timer Minimum number of hosts required for Raid 5: 2n+1.Reduced availability – active rebuild: The object has suffered a failure, but it was configured to be able to tolerate the failure. I/O continues to flow and the object is accessible. vSAN is actively working on re-protecting the object by rebuilding new components to bring the object back to compliance.Reduced availability with no rebuild: The object has suffered a failure, but VSAN was able to tolerate it. For example: I/O is flowing and the object is accessible. However, VSAN is not working on re-protecting the object. This is not due to the delay timer (reduced availability – no rebuild – delay timer) but due to other reasons. This could be because there are not enough resources in the cluster, or this could be because there were not enough resources in the past, or there was a failure to re-protect in the past and VSAN has yet to retry.NO.64 A 5-node vSAN cluster contains multiple virtual machines, and a vSAN storage policy with the rule “Failures to tolerate” set to “1 failure – RAID-5 (Erasure Coding)” is assigned. A vSAN administrator has changed the rile in the assigned policy to “2 failures – RAID-6 (Erasure Coding)”.What is the result of this change?  Changes are queued for 60 minutes.  The policy change is rejected immediately.  The updated policy is serially applied to the virtual machines.  No changes occur until the policy is reapplied. NO.65 A vSAN administrator, who has a cluster that has both compute-only and vSAN ReadyNodes, recently received a request to deploy a new application with higher storage performance requirements than what are currently available.What are two ways the administrator can reconfigure the vSAN cluster to obtain this additional performance? (Choose two.)  Add additional hosts, with capacity devices only, and then stream the cache from the other hosts.  Add cache and capacity devices to the compute-only hosts.  Add additional cache and capacity devices to the existing data nodes.  Add additional compute-only hosts from the vSAN cluster.  Add to the existing disk groups two cache devices and the eight capacity devices. NO.66 Which tool should be used to identify vSAN unassociated objects?  vSphere Host Client  vSphere CLI  vsantop  PowerCLI NO.67 Which option, if any, is the default option to enable Maintenance Mode on a vSAN host?  Ensure accessibility.  No data migration.  Full data migration.  There is no default option. The administrator must select an option. NO.68 A vSAN administrator was examining the status of Virtual Objects and found inaccessible objects that are occupying significant storage capacity.Refer to the exhibit:Which action is needed to restore the storage capacity?  Evacuate data on affected node by using the Full Data Migration mode.  Identity and remove the obsolete object.  Restart the host, and obsolete objects will be removed on their own.  Trigger a manual resync, and allow vSAN to heal the object. NO.69 A vSAN administrator is receiving complaints that applications are not performing as expected. The vSAN administrator opens the vSAN cluster performance charts to try to identify the issue, but the vSAN cluster performance charts are not available.Which option should vSAN administrator enable to make these charts available?  vSAN Performance Diagnostics  vSAN Troubleshooting Diagnostics  vSAN Performance Service  vSAN Troubleshooting Service  Loading … VMware 5V0-22.21 Exam Syllabus Topics: TopicDetailsTopic 1Given a scenario, identify how to create and remove vSAN Direct Configuration Identify the architectural requirements of a standard vSAN cluster, vSAN 2-node cluster, and a vSANstretched clusterTopic 2Identify the characteristics of the different types of encryption Identify which VMware solutions integrate with vSANTopic 3Given a scenario, identify how to upgrade an HCI environment using vSphere Lifecycle Manager (vLCM) Identify the impact of vSAN storage policy changesTopic 4Given a scenario, identify how VMware solutions integrate with vSAN Identify how vSAN stores and protects dataTopic 5Identify how to create, update, and modify vSAN storage policies and apply to objects Identify how to utilize TRIM and UNMAP from vSAN and guest OS perspectiveTopic 6Identify how to use Skyline health check to maintain a healthy status of a vSAN cluster Given a scenario, identify when and how to use vSphere Replication in combination with vSANTopic 7Given a scenario, identify how to configure vSAN storage policies Identify how to monitor vSAN with vRealize OperationsTopic 8Identify Data Persistence platform (DPp) deployment options Identify Data Persistence platform (DPp) deployment optionsTopic 9Identify how to configure vSAN stretched cluster and 2-node configurations Identify how to configure Cloud Native storage (CNS) with appropriate policiesTopic 10Given a scenario, identify how to apply patches using vSphere Lifecycle Manager (LCM) Identify how to monitor vSAN storage policy complianceTopic 11Identify how to determine vSAN health using the UI or ESXCLI Given a scenario, identify how to add and remove hosts from a vSAN cluster   Free VMware Specialist - vSAN 2021 5V0-22.21 Exam Question: https://www.examslabs.com/VMware/VMware-Specialist-vSAN-2021/best-5V0-22.21-exam-dumps.html --------------------------------------------------- Images: https://blog.examslabs.com/wp-content/plugins/watu/loading.gif https://blog.examslabs.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-06-09 18:48:24 Post date GMT: 2022-06-09 18:48:24 Post modified date: 2022-06-09 18:48:24 Post modified date GMT: 2022-06-09 18:48:24