A fully updated 2022 200-901 Exam Dumps exam guide from training expert ExamsLabs [Q29-Q53]

July 9, 2022 200-901, Cisco 0 Comments

A fully updated 2022 200-901 Exam Dumps exam guide from training expert ExamsLabs [Q29-Q53]

4.5/5 - (4 votes)

A fully updated 2022 200-901 Exam Dumps exam guide from training expert ExamsLabs

Provides complete coverage of every objective on exam and exam preparation 200-901

What Is the Cisco DEVASC 200-901 Exam?

DEVASC 200-901 is a 120-minute exam that mostly covers automation, APIs, developing apps and their security, as well as Cisco technologies and platforms. The test is offered in English and Japanese languages and costs $300. Candidates can expect multiple-choice, multiple answers, fill-in-the-blank as well as drag and drop questions. The passing score and the number of questions are not specified by Cisco. By excelling in this exam, one becomes a reputed DevOps professional respected within the industry.

NEW QUESTION 29
Refer to the exhibit.

A REST API retune this JSON output for a GET HTTP request, Which has assigned to a variable called
“vegetables” Using python, which output is the result of this command?

Lettuce

Kiwi

[‘kiwi’, ‘grape’]

{‘color’: ‘green’, ‘items’: [‘kiwi’, ‘grape’]

NEW QUESTION 30
Refer to the exhibit.

What caused the error in this API request?

The API resource does not support the POST operation

The API resource does not support JSON format payloads.

The submitted JSON payload includes a field that is not supported by the API resource.

The submitted JSON payload has a formatting issue

NEW QUESTION 31
Refer to the exhibit.

A network engineer works on a Cisco DevNet application that is available for download on the Cisco DevNet website. The engineer prepares a bash script to automate operations that relate to the application. Which workflow is being automated in the bash script?

compilation and configuration of the Cisco DevNet application so that it must be started manually

compilation, installation, and configuration of the Cisco DevNet application so that it starts automatically

compilation and installation of the Cisco DevNet application for an autonomous deployment model

installation and configuration of the Cisco DevNet application so that it starts manually

NEW QUESTION 32
Refer to the exhibit.

What is the action of the Bash script that is shown?

The script waits until input is entered. If the directory exists, the script goes into it until there is no directory with the same name, then it creates a new directory.

The script goes into the directory called “$ndir” and makes a new directory called “$ndir”

The script waits unit input is entered, then it goes into the directory entered and creates a new directory with the same name.

For all directories in the current folder. The script goes into directory and makes a new directory.

NEW QUESTION 33
Refer to the exhibit.

Which JSON is equivalent to the XML -encoded data?

Option A

Option B

Option C

Option D

NEW QUESTION 34
Fill in the blanks to complete the python script to retrieve a list of network devices using the Cisco DNA center API.

“GET”, headers, payload
Explanation
Solution as below.

NEW QUESTION 35
Refer to the exhibit.

Drag and drop the descriptors from the left onto the correct parts of the API request and response on the right.

NEW QUESTION 36
Refer to the exhibit.

An API call is constructed to retrieve the inventory in XML format by using the API. The response to the call is 401 Unauthorized. Which two headers must be added to the API call? (Choose two.)

Option A

Option B

Option C

Option D

Option E

NEW QUESTION 37
Refer to the exhibit.

A developer needs to automatically retrieve all of the messages of a Webex room with the roomld of HY2l2Y292cGFyazovL3Vz397748444YjU5NjAtNTk0ZJ0xMWVhLTk0Mj”. Using the Webex API documentation shown, drag and drop the code snippets from below onto the code to complete the Python script to list all of the messages in the room. Not all options are used.

Explanation
Graphical user interface Description automatically generated with medium confidence

NEW QUESTION 38
Refer to the exhibit.

Which infrastructure automation method is shown?

Waterfall

CI/CD pipeline

Agile

Lean

NEW QUESTION 39
Drag and drop the requests from the left into the correct order on the right to create and check the path trace between two devices using Cisco DNA center API.

Explanation
1 – C, 2 – D, 3 – B, 4 – A

NEW QUESTION 40
Fill in the blanks to complete the statement.
Cisco DNA provide the capability to send an HTTP _______________ request to the API endpoint https://DNA-c_API_ADDRESS/api/vi/network-device/ and receive the network __________ list in __________ format.

GET, device, JSON
Explanation
Solution below as

NEW QUESTION 41
Which model-driven programmability protocol does Cisco IOS XE Software support?

CORBA

SSH

gNMI

SOAP

Explanation

NEW QUESTION 42
Refer to the exhibit.

Drag and Drop the code from the bottom onto the box where the code is missing on the Meraki Python script to create a new network

NEW QUESTION 43

Refer to the exhibit. An engineer must add a subnet for a new office that will add 20 users to the network.
Which IPv4 network and subnet mask combination does the engineer assign to minimize wasting addresses?

10.10.225.48 255.255.255.240

10.10.225.32 255.255.255.240

10.10.225.48 255.255.255.224

10.10.225.32 255.255.255.224

Section: Network Fundamentals

NEW QUESTION 44
Refer to the exhibit.

Which device limits traffic between server 1 and server 2?

Device B

Device C

Device D

Device E

NEW QUESTION 45
Drag and drop the element of the Finesse API on the left onto the description of its functionally on the right.

NEW QUESTION 46
Refer to the exhibit.

What is the function of the python script?

Count and print the total number of available devices.

Iterate over a list of network devices and write all device names and management IP addresses to an output file.

Iterate over a list of network devices and write all device type and associated management IP address.

For each device that is returned, display the device and, for each device, print the device name and management IP address.

Loop through the returned list of network devices and, for each device, print the device name management IP address.

NEW QUESTION 47
What is the primary effect of the spanning-tree portfast command?

It immediately enables the port in the listening state.

It immediately puts the port into the forwarding state when the switch is reloaded.

It enables BPDU messages.

It minimizes spanning-tree convergence time.

Section: Network Access
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3560/software/release/12-2_55_se/ configuration/guide/3560_scg/swstpopt.html

NEW QUESTION 48
Drag and drop the code snippets from the bottom into the Python script to write API output to a csv file. Not all options are used.

NEW QUESTION 49
Drag and drop the code from the bottom onto the box where the code is missing in the Bash script to complete the missing assignment.

NEW QUESTION 50
Refer to the exhibit.

Which two statement describe the configuration of the Ansible script is run? (Choose two.)

Traffic on port 0/2 and 0/3 is connected to port 0/6.

Traffic from ports 0/2 to 0/5 can flow on port 0/1 due to the trunk.

Traffic can flow between ports 0/2 to 0/5 due to the trunk on port 0/1.

GigabitEthernet0/2 and GigabitEthernet0/3 are access ports for VLAN 6.

GiabitEthernet0/1 is left unconfigured.

NEW QUESTION 51
Refer to the exhibit.

The JSON data in the exhibit has been parsed and stored in a variable, “data”. What returns the value “172.16.0.11” ?

data[‘items’][O][‘host’][‘value’]

data[‘items’][‘1’][‘host’][‘value’]

data[‘items’][‘host’][1]

data[‘items’][‘host’][‘value’]

NEW QUESTION 52
Drag and Drop the Bash commands from the left onto the correct actions on the right.

Explanation

1 – d, 2 – i, 3 – e, 4 – a, 5 – j, 6 – b, 7 – g, 8 – h, 9 – c, 10 – f

NEW QUESTION 53
Refer to the exhibit.

A network engineer wants to use an API to update information about device interfaces. The network devices are deployed in a Cisco DevNet Sandbox and have running interfaces. Which line of code needs to be placed in the snippet where the code is missing?