Fortinet NSE5_FMG-6.4 Test Engine Dumps Training With 60 Questions [Q32-Q53]

July 30, 2022 NSE5_FMG-6.4, Fortinet 0 Comments

Fortinet NSE5_FMG-6.4 Test Engine Dumps Training With 60 Questions [Q32-Q53]

4/5 - (2 votes)

Fortinet NSE5_FMG-6.4 Test Engine Dumps Training With 60 Questions

NSE5_FMG-6.4 Questions Pass on Your First Attempt Dumps for NSE 5 Network Security Analyst Certified

Fortinet NSE5_FMG-6.4 Exam Syllabus Topics:

Topic	Details
Topic 1	Install device level configuration changes Perform initial configuration
Topic 2	Identify how the ADOM version affects policy and object configurations Troubleshoot device communication issues
Topic 3	Configure administrative domains (ADOMs) Troubleshoot device and ADOM databases
Topic 4	Manage registered devices Configure security fabric using central management

Q32. Which two settings must be configured for SD-WAN Central Management? (Choose two.)

SD-WAN must be enabled on per-ADOM basis

You can create multiple SD-WAN interfaces per VDOM

When you configure an SD-WAN, you must specify at least two member interfaces.

The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.

Q33. View the following exhibit.

Which one of the following statements is true regarding the object named ALL?

FortiManager updated the object ALL using FortiGate’s value in its database

FortiManager updated the object ALL using FortiManager’s value in its database

FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.

FortiManager installed the object ALL with the updated value.

Q34. Refer to the exhibit.

An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command?

It allows FortiGate to unset central management settings.

It allows FortiGate to reboot and recover the previous configuration from its configuration file.

It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.

It allows FortiGate to reboot and restore a previously working firmware image.

Q35. Refer to the exhibit.

Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.)

It supports the FortiManager script feature

It allows making configuration changes for managed devices on FortiManager panes

FortiManager automatically installs the configuration difference in revisions on the managed FortiGate

You cannot assign the same ADOM to multiple administrators

Q36. In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

Secondary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to point to the new primary device

Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.

Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.

FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.

Q37. View the following exhibit:

How will FortiManager try to get updates for antivirus and IPS?

From the list of configured override servers with ability to fall back to public FDN servers

From the configured override server list only

From the default server fdsl.fortinet.com

From public FDNI server with highest index number only

Q38. An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?

FortiManager will not allow the administrator to delete a referenced address object

FortiManager will disable the status of the referenced firewall policy

FortiManager will replace the deleted address object with the none address object in the referenced firewall policy

FortiManager will replace the deleted address object with all address object in the referenced firewall policy

Q39. Refer to the exhibit.

Which statement about the object named ALL is true?

FortiManager updated the object ALL using the FortiGate value in its database.

FortiManager installed the object ALL with the updated value.

FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.

FortiManager updated the object ALL using the FortiManager value in its database.

Q40. View the following exhibit.

When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)

Once initiated, the install process cannot be canceled and changes will be installed on the managed device

Will not create new revision in the revision history

Installs device-level changes to FortiGate without launching the Install Wizard

Provides the option to preview configuration changes prior to installing them

Q41. Which three settings are the factory default settings on FortiManager? (Choose three.)

Username is admin

Password is fortinet

FortiAnalyzer features are disabled

Reports and Event Monitor panes are enabled

port1 interface IP address is 192.168.1.99/24

Q42. What does the diagnose dvm check-integrity command do? (Choose two.)

Internally upgrades existing ADOMs to the same ADON version in order to clean up and correct the ADOM syntax

Verifies and corrects unregistered, registered, and deleted device states

Verifies and corrects database schemas in all object tables

Verifies and corrects duplicate VDOM entries

Q43. What does a policy package status of Conflict indicate?

The policy package reports inconsistencies and conflicts during a Policy Consistency Check.

The policy package does not have a FortiGate as the installation target.

The policy package configuration has been changed on both FortiManager and the managed device independently.

The policy configuration has never been imported after a device was registered on FortiManager.

Q44. An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?

When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package

When a new policy package is created, the administrator needs to reapply the global policy package to ADOM1.

When a new policy package is created, the administrator must assign the global policy package from the global ADOM.

When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

Q45. Which two statements regarding device management on FortiManager are true? (Choose two.)

FortiGate devices in HA cluster devices are counted as a single device.

FortiGate in transparent mode configurations are not counted toward the device count on FortiManager.

FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices.

The maximum number of managed devices for each ADOM is 500.

Q46. Refer to the exhibits.
Exhibit one.

Exhibit two.

An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.
What can be the main reason for these unset commands?

The DNS addresses in the default system settings are the same as the Training system template

The Training system template has other default settings

The ADOM is locked by another administrator

The Training system template does not have assigned devices

Q47. An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?

Allows FortiManager to download IPS packages

Allows FortiManager to respond to request for FortiGuard services from FortiGate devices

Allows FortiManager to run real-time debugs on the managed devices

Allows FortiManager to automatically configure a default route

Q48. View the following exhibit.

Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?

The Install On column value represents successful installation on the managed devices

Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets

Policy seq#3 will be installed on the Trainer[NAT] VDOM only

Policy seq#3 will be not installed on any managed device

Q49. An administrator would like to create an SD-WAN using central management in the Training ADOM.
To create an SD-WAN using central management, which two steps must be completed? (Choose two.)

Specify a gateway address when you create a default SD-WAN static route

Enable SD-WAN central management in the Training ADOM

Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings

Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces

Q50. Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

It does not back up firmware images saved on FortiManager.

It can be configured using the CLI and GUI.

It backs up all devices and the FortiGuard database.

It supports FTP, SCP, and SFTP.

Q51. Which two items does an FGFM keepalive message include? (Choose two.)

FortiGate uptime

FortiGate license information

FortiGate IPS version

FortiGate configuration checksum

Q52. An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces.
Which interface must the administrator select in the static route device drop-down list?

port2

virtual-wan-link

port1

auto-discovery

Q53. Refer to the following exhibit:

Which of the following statements are true based on this configuration? (Choose two.)