[Jul 06, 2022] ExamsLabs OmniStudio-Developer dumps & Salesforce Developer sure practice dumps [Q34-Q52] : Exams Labs Braindumps : http://blog.examslabs.com

NEW QUESTION 34
Refer to the exhibit.

A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?

Lookup Mode is not selected in the properties of the Type A Head Block.

Use Data JSON is not selected in the properties of the Type Ahead Block.

FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.

The Typeghead ley is not in the correct format

NEW QUESTION 35
A developer creates a Flexcard that displays a contact’s mailing address and passes the contact’s postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact’s postal code?

{Postalcode}

{Parent.postalcode}

{Records.postalcode}

{Params.postalcode}

NEW QUESTION 36
A developer creates a FlexCard with five state elements. For of the states have a condition. To test the FlexCard, the developer previews it using sample data that causes two of the states to have true conditions.
In this scenario, how will the developer know which state will display?

The first state with true conditions sequence closest to the top of the FlexCard canvas will display.

The first state with true nested condition, regardless of sequence in the FlexCard canvas, will display

The state sequenced first in the FlexCard canvas will display.

The first state with a true AND condition, regardless of sequence in the FlexCard canvas, will display.

NEW QUESTION 37
A developer has an existing DataRaptor Load that insert Contact records with inputs as LastName and firstName. The DataRaptor works as expected when previewed.
The developer creates an integration Procedure to test the DataRaptor and is using a SetValues element in the Integration Procedure to set the first name and last name for the contact record. The DataRaptor and Integration Procedure are set up as shown in the exhibit below.

When the developer executes the Integration procedure in preview, the following error message displays: Required fields are missing: [last Name]”, How should the developer address this issue?

SetValuesContactDetails should have been added to Additional input of DataRaptor Post Action in Integration Procedure

The Set values Action Keys should include the DataRaptor Post Action element name path, e,g LoadContactDetails, lastname

The DataRaptor Post Action in the integration procedure should have been executed before the Set Values Action

The valid field names should be added in the Domain object field in the DataRaptor

NEW QUESTION 38
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with action to close the case and update the case. And it will be styled using the Community’s theme.
What must be developer do to configure the FlexCard for deployment in a Community?

Add the FlexCard’s API name to FlexCard Player component

Set the Target property in publish Options to Communitypage”

Configure the Component visibility in the custom Component.

Set the Developer property in Card Configuration to ”Community”

NEW QUESTION 39
What two advantages does a DataRaptor Turbo Extract have over a standard DataRaptor Extract?
Choose 2 answers

It populates data in PDF and DocuSign format

It is easier to configure

It has better performance at runtime

It supports complex field mappings

NEW QUESTION 40
Which twoof the items below must be defined before you can create a new OmniScript? Choose 2 answers

SubType

Type

Template

Description

NEW QUESTION 41
You want to use a custom icon in a FlexCard.
How would you do this?

Select Salesforce SVG as the icon type and scroll through until you find the custom icons

Select Custom as the icon type and search for the custom icon you want from the library

Select Salesforce SVG as the icon type and search for custom to find the custom icon

Select Custom as the icon type and enter the icon URL in the Image Source field

NEW QUESTION 42
A healthcare company wants to enable its subscribers to add, edit, or delete dependents related to their policy Community portal. The developer on the project decides to use an MniScript.
How should the developer configure the OmniScript to provide this functionality?

Use an Edit Block element configured with Remote Actions.

Use an Edit Block element configured with SOQL statements.

Use an Input Block element and a DataRaptor Post Action element.

Use a Text Block element and a Remote Action element.

NEW QUESTION 43
What is the reason for this? Refer to the exhibit below.

The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.

The flag passData.JSON in the parent OmniScript in not configured correctly.

A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.

Both parent and embedded OmniScripts have the same element name for the Set Values element.

NEW QUESTION 44
…… configure Additional input to send exactly the same data? Assume that thedevelop checked Send Only Additional input.

A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 45
A developer needs to build a multi-step intakeform. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement the cancel functionality for all steps using the LWC OmniScript Designer?

Check the Enable Cancel checkbox in the Setup tab under Cancel Options.

Add a navigation Action inside each step and set the Component name to ”Cancel”,

Add a navigation Action outside each step and set the Element Name to ”Cancel”,

Add a navigation Actioninside each step and set the Element Name to ”Cancel”,

NEW QUESTION 46
A company wants to allow agents to send customers a quote for signature. The quote is a documents created using a DocuSign template that has been prefilled with all of the quote details. The document will be emailed to one or more recipients for signature.
How should a developer configure this functionality in an OmniScript?

DocuSign Envelope Action

PDF Acwm

DocuSign Signature Action

Email Action

NEW QUESTION 47
Which of these samples would be valid for the Expected Output JSON?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 48
You are building a DataRaptor Load for an Integration Procedure used in an OmniScript.
Based on best practices, how should you configure the Input JSON?

Build the Input JSON node by node in the DataRaptor Designer.

Copy the Input JSON from the DataRaptor Action Debug node.

Copy the Input JSON from the OmniScript {Data} modal.

Build the Input JSON node by node in an editor.

NEW QUESTION 49
A developer needs to transform contact data into a JSON array.

Given the input JSON shown above, what are two ways a developer could configure a DATARaptor transform to achieve theexpected Output JSON? Choose 2 answers

Use a formula LIST(Contact), and add the output of the formula as the input in the Transform tab.

Set the Input JSON path as List(Contact) and the OutputJSON Path as Contact.

Set the Input JSON Path as Contact the out JSON Path as contact and output Data type as List.

Set the input JSON Path as Contact and the OutPut JSON Path as List (Contact)

NEW QUESTION 50
In an Integration Procedure, you need to perform a multi-step calculation on every element of an array. Based on best practices, what two methods are recommended? Choose 2 answers

Use a Calculation Action to call a Calculation Procedure.

Use a Set Values Element inside a Loop Block.

Use a List Action to merge the array elements together.

Use a Matrix Action to call a Calculation Matrix

NEW QUESTION 51
A developer is building an OmniScript and needs to save to Salesforce and to an AWS Order Management system.
Which OmniScript element could save all of this data?

DataRaptor Post Action

HTTP Action

Integration Procedure Action

DataRaptor Load Action

NEW QUESTION 52
The OmniScript must retrieve device details stored in the Asset object and then call an external system to send troubleshooting commands via REST API to the device.
Which two OmniScript element should the developer use to configure this functionality?

DataRaptor Extract Action

REST API Action

Navigation Action

SOQL Action

HTTP Action

[Jul 06, 2022] ExamsLabs OmniStudio-Developer dumps & Salesforce Developer sure practice dumps [Q34-Q52]

Salesforce OmniStudio-Developer Exam Syllabus Topics: