This page was exported from Exams Labs Braindumps [ http://blog.examslabs.com ] Export date:Thu Nov 7 6:28:08 2024 / +0000 GMT ___________________________________________________ Title: Pass F5 201 Exam with Guarantee Updated 255 Questions [Q149-Q171] --------------------------------------------------- Pass F5 201 Exam with Guarantee Updated 255 Questions Latest 201 Pass Guaranteed Exam Dumps Certification Sample Questions NEW QUESTION 149Refer to the exhibit.A BIG-IP Administrator configures a now VLAN on an HA pair of devices that does NOT yet have any traffic. This action causes the assigned traffic group to fail over to the standby device.Which VLAN setting should be changed to prevent this issue?  Auto Last Hop  Fail-safe  Customer Tag  Source Check NEW QUESTION 150Which statement is true concerning iRule events?  All iRule events relate to HTTP processes.  All client traffic has data that could be used to trigger iRule events.  All iRule events are appropriate at any point in the clientserver communication.  If an iRule references an event that doesn’t occur during the client’s communication, the client’s connection will be terminated prematurely. NEW QUESTION 151A BIG-IP Administrator needs to restore an encrypted UCS archive from the command line using the TMSH utility.Which TMSH command should the BIG-IP Administrator use to accomplish this?  load/sys ucs <filepath> passphrase <password>  load/sys config file <filepath> passphrase <password>  load/sys config file <filepath>  load/sys ucs <filepath> no-license NEW QUESTION 152A BIG-IP Administrator must configure the BIG-IP device to send system log messages to a remote syslog server In addition, the log messages need to be sent over TCP for guaranteed delivery. What should the BIG-IP Administrator configure?  syslog-ng  Request Logging Profile  HSL Logging  Remote Logging NEW QUESTION 153Where is the loadElbalancing mode specified.  within the pool definition  within the node definition  within the virtual server definition  within the pool member definition NEW QUESTION 154Which statement describes a typical purpose of iRules.  iRules can be used to add individual control characters to an HTTP data stream.  iRules can be used to update the timerson monitorsas a server load changes.iRules can be used to update the timers on monitors as a server. load changes.  iRules can examinea server response andremoveit from a pool if the response is unexpectediRules can examine a server. response and remove it from a pool if the response is unexpected  iRules can be used to look at client requests and server responses to choose a pool member to select for load balancing NEW QUESTION 155Refer to the exhibit.An organization is reporting slow performance accessing their Intranet website, hosted in a public cloud. All employees use a single Proxy Server with the public IP of 104.219.110.168 to connect to the Internet. What should the BIG-IP Administrator of the Intranet website do to fix this issue?  Change Source Address to 104.219.110.168/32  Change Load Balancing Method to Least Connection  Change Fallback Persistence Profile to source_addr  Change Default Persistence Profile to cookie NEW QUESTION 156Refer to the exhibit.Which two pool members should be chosen for a new connection? (Choose two.)  172.16.15.9.80  172.16.15.4.80  172.10.15.2.80  172.16.15.1.80  172.16.15.7.80 NEW QUESTION 157A BIG-IP Administrator wants to add the ASM Module to an HA pair of BIG-IP devices. The BIG-IP Administrator has already installed a new Add-On License on both devices in the HA pair. What should the BIG-IP Administrator do next to use the module?  Provision the new module on both BIG-IP device’s  Synchronize both BIG-IP devices  Reboot both BIG-IP devices  Reactivate the Licenses on both BIG IP devices NEW QUESTION 158A BIG-IP Administrator makes a configuration change to the BIG-IP device. Which file logs the message regarding the configuration change?  /var/log/messages  /var/log/audit  /var/log/user.log  /var/log/secure ExplanationAbout audit loggingAudit logging is an optional feature that togs messages whenever a BIG-IP system object, such as a virtual server or a load balancing pool, is confined (that is. created, modified, or deleted). The BiGIP system logs the messages for these auditing events in the file /var/log’audit There are three ways that objects can be configured* By user action* By system action* By loading configuration dataWhenever an object is configured in one of these ways, the BIG-IP system logs a message to the audit logNEW QUESTION 159Which method is recommended for creating a new user from the CLI?  Run f5adduser username’ then ‘f5passwd username’ from bash or tmsh  Run tmsh create auth user username prompt for password’ from bash  edit bigip.conf to add the new user and the user’s clear-text password  Run useradd username’ then ‘passwd username’ from bash tmsh NEW QUESTION 160You have created a custom profile named TEST2. The parent profile of TEST2 is named TEST1. If additional changes are made to TEST1, what is the effect on TEST2?  All changes to TEST1 are propagated to TEST2.  Some of the changes to TEST1 may propagate to TEST2.  Changes to TEST1 cannot affect TEST2 once TEST2 is saved.  When TEST1 is changed, the administrator is prompted and can choose whether to propagate changes to TEST2. NEW QUESTION 161Which method is recommended for creating a new user from the CLI?  Run f5adduser username’ then ‘f5passwd username’ from bash or tmsh  Run tmsh create auth user username prompt for password’ from bash  edit bigip.conf to add the new user and the user’s clear-text password  Run useradd username’ then ‘passwd username’ from bash tmsh Reference:The f5adduser commands were removed and tmsh is the recommended way to create users.https://support.f5.com/csp/article/K11677NEW QUESTION 162An LTM device has a virtual server mapped to www5f.com with a pool assigned. The objects are defined as follows:Virtual server. Destination 192.168.245.100.443 netmask 255.255.255.0Persistence: Source address persistence netmask 255.0.0.0SNAT:AutoMapProfiles: HnP/TCPHow should the BIG-IP Administrator modify the persistence profile so that each unique IP address creates a persistence record?  netmask 0.0.0.0  netmask 255.255.255.255  netmask 255.255.0.0  netmask 255.256.255.0 NEW QUESTION 163One of the two members of a device group has been decommissioned. The BIG-IP Administrator tries to delete the device group, but is unsuccessful.Prior to removing the device group, which action should be performed?  Disable the device group  Remove all members from the device group  Remove the decommissioned device from the device group  Make sure all members of the device group are in sync NEW QUESTION 164Which type of Virtual Server requires the use of a FastL4 profile?  Performance (Layer 4)  Stateless  Performance (HTTP)  Standard NEW QUESTION 165Refer to the exhibit.Which two pool members should be chosen for a new connection? (Choose two.)  172.16.15.9.80  172.16.15.4.80  172.10.15.2.80  172.16.15.1.80  172.16.15.7.80 NEW QUESTION 166Refer to the exhibit.The BIG-IP Administrator has modified an iRule on one device of an HA pair. The BIG-IP Administrator notices there is NO traffic on the BIG-IP device in which they are logged into.What should the BIG-IP Administrator do to verify if the iRule works correctly?  Push configuration from this device to the group and start to monitor traffic on this device  Pull configuration to this device to the cluster and start to monitor traffic on this device  Log in to the other device in the cluster, push configuration from it, and start to monitor traffic on that device  Log in to the other device in the cluster, pull configuration to it, and start to monitor traffic on that device ExplanationThe device in the picture is a standby machine, of course there is no traffic, you need to log in to the host, and then pull the configuration to the host.NEW QUESTION 167A BIG-IP Administrator needs to find which modules have been licensed for use on the BIG-IP system. In which section of the Configuration Utility can the BIG-IP Administrator find this information?  System > Services  System > Resource Provisioning  System > Platform  System > Support NEW QUESTION 168Which Virtual Server type should be used to load balance HTTP traffic to a pool of servers?  Standard  Stateless  Forwarding (IP)  Forwarding (Layer 2) NEW QUESTION 169Refer to the exhibit.A BIG-IP Administrator needs to configure health monitors for a newly configured server pool named Pool_B.Which health monitor settings will ensure that all pool members will be accurately marked as available or unavailable?  HTTPS, HTTP, FTP, and ICMP, with the Availability Requirement of all health monitors  HTTPS, HTTP, FTP, and SSH, with the Availability Requirement of at least one monitor  HTTPS and HTTP with the Availability Requirement of at least one health monitor  HTTPS, HTTP, FTP, and SSH with the Availability Requirement of all health monitors From the port, the four members are HTTP, FTP, HTTPS, and SSH applications. If you want to monitor at the same time, you must configure at least one.NEW QUESTION 170The interface 1.1 of the BIG-IP device has been connected to a link dedicated to traffic on VLAN 120. What should the BIG-IP Administrator do to receive traffic from the VLAN?  Create a new VLAN object and set Customer Tag to 120  Create a new VLAN object and assign the interface 1.1 untagged  Create a new trunk object with interface 1.1 assigned  Create a new trunk object and assign it to the VLAN NEW QUESTION 171Which log file should the BIG-IP Administrator check to determine if a specific user tried to log in to the 8IG-IP Configuration by utility?  /var/log/pam/tally/log  /ver/log/secure  /var/log/trn  /var/log/http.d  Loading … New 201 Test Materials & Valid 201 Test Engine: https://www.examslabs.com/F5/F5Networks/best-201-exam-dumps.html --------------------------------------------------- Images: https://blog.examslabs.com/wp-content/plugins/watu/loading.gif https://blog.examslabs.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-07-08 11:51:25 Post date GMT: 2022-07-08 11:51:25 Post modified date: 2022-07-08 11:51:25 Post modified date GMT: 2022-07-08 11:51:25