Latest NSE5_FMG-7.0 Actual Free Exam Updated 74 Questions [Q18-Q41] : Exams Labs Braindumps : http://blog.examslabs.com

NEW QUESTION 18
Which two settings must be configured for SD-WAN Central Management? (Choose two.)

SD-WAN must be enabled on per-ADOM basis

You can create multiple SD-WAN interfaces per VDOM

When you configure an SD-WAN, you must specify at least two member interfaces.

The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.

NEW QUESTION 19
An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?

By a dollar symbol ($) at the end of the device name

By an at symbol (@) at the end of the device name

By a

By an Asterisk (*) at the end of the device name

NEW QUESTION 20
Refer to the exhibit.

An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

192.168.0.1/24

10.200.1.0/24

It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.

Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.

NEW QUESTION 21
View the following exhibit.

Which statement is true regarding this failed installation log?

Policy ID 2 is installed without a source address

Policy ID 2 will not be installed

Policy ID 2 is installed in disabled state

Policy ID 2 is installed without a source device

NEW QUESTION 22
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.
Which statement about the global policy package assignment to the newly-created policy package Fortinet is true?

When a new policy package is created, it automatically assigns the global policies to the new package.

When a new policy package is created, you need to assign the global policy package from the global ADOM.

When a new policy package is created, you need to reapply the global policy package to the ADOM.

When a new policy package is created, you can select the option to assign the global policies to the new package.

NEW QUESTION 23
An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?

FortiManager will not allow the administrator to delete a referenced address object

FortiManager will disable the status of the referenced firewall policy

FortiManager will replace the deleted address object with the none address object in the referenced
firewall policy

FortiManager will replace the deleted address object with all address object in the referenced firewall policy

NEW QUESTION 24
Refer to the exhibit.

Which two statements are true if the script is executed using the Device Database option? (Choose two.)

You must install these changes using the Install Wizard to a managed device

The successful execution of a script on the Device Database will create a new revision history

The script history will show successful installation of the script on the remote FortiGate

The Device Settings Status will be tagged as Modified

NEW QUESTION 25
Which two conditions trigger FortiManager to create a new revision history? (Choose two.)

When configuration revision is reverted to previous revision in the revision history

When FortiManager installs device-level changes to a managed device

When FortiManager is auto-updated with configuration changes made directly on a managed device

When changes to device-level database is made on FortiManager

NEW QUESTION 26
Which two statements about Security Fabric integration with FortiManager are true? (Choose two.)

The Security Fabric license, group name and password are required for the FortiManager Security Fabric
integration

The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices

The Security Fabric settings are part of the device level settings

The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices

NEW QUESTION 27
What will happen if FortiAnalyzer features are enabled on FortiManager?

FortiManager will keep all the logs and reports on the FortiManager.

FortiManager will enable ADOMs to collect logs automatically from non-FortiGate devices.

FortiManager will install the logging configuration to the managed devices

FortiManager can be used only as a logging device.

NEW QUESTION 28
Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

It does not back up firmware images saved on FortiManager.

It can be configured using the CLI and GUI.

It backs up all devices and the FortiGuard database.

It supports FTP, SCP, and SFTP.

NEW QUESTION 29
View the following exhibit.

When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)

Once initiated, the install process cannot be canceled and changes will be installed on the managed device

Will not create new revision in the revision history

Installs device-level changes to FortiGate without launching the Install Wizard

Provides the option to preview configuration changes prior to installing them

NEW QUESTION 30
Refer to the exhibit.

Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.)

It supports the FortiManager script feature

It allows making configuration changes for managed devices on FortiManager panes

FortiManager automatically installs the configuration difference in revisions on the managed FortiGate

You cannot assign the same ADOM to multiple administrators

NEW QUESTION 31
An administrator run the reload failure command: diagnose test deploymanager reload config
<deviceid> on FortiManager. What does this command do?

It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.

It installs the latest configuration on the specified FortiGate and update the revision history database.

It compares and provides differences in configuration on FortiManager with the current running
configuration of the specified FortiGate.

It installs the provisioning template configuration on the specified FortiGate.

NEW QUESTION 32
View the following exhibit.

Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?

The Install On column value represents successful installation on the managed devices

Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets

Policy seq#3 will be installed on the Trainer[NAT] VDOM only

Policy seq#3 will be not installed on any managed device

NEW QUESTION 33
Which configuration setting for FortiGate is part of an ADOM-level database on FortiManager?

NSX-T Service Template

Security profiles

SNMP

Routing

NEW QUESTION 34
Refer to the exhibit.

Which statement about the object named ALL is true?

FortiManager updated the object ALL using the FortiGate value in its database.

FortiManager installed the object ALL with the updated value.

FortiManager created the object ALL as a unique entity in its database, which can be only used by this
managed FortiGate.

FortiManager updated the object ALL using the FortiManager value in its database.

NEW QUESTION 35
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?

Allows FortiManager to download IPS packages

Allows FortiManager to respond to request for FortiGuard services from FortiGate devices

Allows FortiManager to run real-time debugs on the managed devices

Allows FortiManager to automatically configure a default route

NEW QUESTION 36
An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.
How should the Workspace mode be configured on FortiManager?

Set to workflow and use the ADOM locking feature

Set to read/write and use the policy locking feature

Set to normal and use the policy locking feature

Set to disable and use the policy locking feature

NEW QUESTION 37
View the following exhibit.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on
FortiGate under central management.

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

NEW QUESTION 38
Refer to the exhibit.

According to the error message why is FortiManager failing to add the FortiAnalyzer device?

The administrator must turn off the Use Legacy Device login and add the FortiAnaJyzer device to the same network as Forti-Manager

The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface

The administrator must use the Add Model Device section and discover the FortiAnaJyzer device

The administrator must use the correct user name and password of the FortiAnalyzer device

NEW QUESTION 39
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.
Which statement about the global policy package assignment to the newly-created policy package Fortinet is true?

When a new policy package is created, it automatically assigns the global policies to the new package.

When a new policy package is created, you need to assign the global policy package from the global
ADOM.

When a new policy package is created, you need to reapply the global policy package to the ADOM.

When a new policy package is created, you can select the option to assign the global policies to the new package.

NEW QUESTION 40
An administrator would like to authorize a newly-installed AP using AP Manager. What steps does the administrator need to perform to authorize an AP?

Authorize the new AP using AP Manager and wait until the change is updated on the FortiAP. Changes to the AP’s state do not require installation.

Changes to the AP’s state must be performed directly on the managed FortiGate.

Authorize the new AP using AP Manager and install the policy package changes on the managed FortiGate.

Authorize the new AP using AP Manager and install the device level settings on the managed FortiGate.

NEW QUESTION 41
Refer to the exhibit.

Which two statements about the output are true? (Choose two.)

The latest revision history for the managed FortiGate does match with the FortiGate running configuration

Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed

The latest history for the managed FortiGate does not match with the device-level database

Configuration changes directly made on the FortiGate have been automatically updated to device-level