[Q206-Q228] Exam 350-801 Realistic Dumps Verified Questions Free [Sep 10, 2023]

September 10, 2023 350-801, Cisco 0 Comments

[Q206-Q228] Exam 350-801 Realistic Dumps Verified Questions Free [Sep 10, 2023]

Rate this post

Exam 350-801 Realistic Dumps Verified Questions Free [Sep 10, 2023]

Valid 350-801 Dumps for Helping Passing Cisco Exam!

Cisco 350-801 exam is a challenging certification exam that requires a significant amount of preparation and study. Candidates are recommended to have at least three to five years of experience working with Cisco collaboration solutions to be able to pass 350-801 exam. However, with the right preparation and study materials, candidates can successfully pass the exam and demonstrate their expertise in implementing and operating Cisco collaboration core technologies.

Cisco 350-801 Exam Certification Details:

Exam Price	$400 USD
Passing Score	Variable (750-850 / 1000 Approx.)
Exam Name	Implementing Cisco Collaboration Core Technologies
Recommended Training	Implementing Cisco Collaboration Core Technologies (CLCOR)
Number of Questions	90-110
Exam Code	350-801 CLCOR

NEW QUESTION 206
Due to service provider restriction, Cisco Unified Communications Manager cannot send video in the SDP. Which two options on Cisco Unified CM are configured to suppress video in the SDP is outgoing invites? (Choose two.)

Check the Send send-receive SDP in mid-call INVITE check box on the SIP trunk SIP profile.

Add the audio forced command to voice service voip on the Unified Border Elements.

Check the Retry Call as Audio on the SIP trunk

Set Video bandwidth in the Region settings to 0.

Change the Video Capabilities dropdown on the endpoint to Disabled.

The reason is it has to be only in CUCM per the question. You would create a specific Region relationship for the Device Pool applied to the trunk that cannot handle video and thus change the Maximum Video Bandwidth to 0 while setting retry a video call as audio on the Phone Configuration (default setting is this is already checked).

NEW QUESTION 207
An engineer is going to redesign a network, and while looking at the QoS configuration, the engineer sees that a portion of the network is marked with AF42. Which type of traffic is marked with this tag?

signaling

voice

video conference

streaming video

NEW QUESTION 208
An administrator configures Cisco UCM to use UDP for SIP signaling and finds that an endpoint cannot make calls.
Which action resolves this issue?

Change the phone security profile.

Change the SIP dial rules.

Change the SIP profile

Change the common phone profile.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/security/11_5_1/secugd/CUCM_BK
_SEE2CFE1_00_cucm-security-guide-1151/CUCM_BK_SEE2CFE1_00_cucm-security-guide-
1151_chapter_0111.html

NEW QUESTION 209
Which configuration on Cisco UCM is required for SIP MWl to work?

Assign an MWl extension on the mailbox.

The line partition must be inside the inbound CSS assigned to the CUC SIP trunk.

The line partition must be inside the rerouting CSS assigned to the Cisco Unity Connection SIP trunk.

Set the”Enable message waiting indicator” on the port group.

The line partition must be inside the inbound CSS assigned to the CUC SIP trunk. This ensures that the SIP MWI messages are sent to the correct destination.
The other options are incorrect because:
Assigning an MWI extension on the mailbox is not required for SIP MWI to work.
The line partition does not need to be inside the rerouting CSS assigned to the Cisco Unity Connection SIP trunk.
Setting the “Enable message waiting indicator” on the port group is not required for SIP MWI to work.

NEW QUESTION 210
Refer to the exhibit.

This INVITE is sent to an endpoint that only supports G.729. what must be done for this call to succeed?

Noting; both sides support G.729.

Add a transcoder that supports G.711ualw and G.729.

ADD a media termination point that supports G.711ulaw and G.729.

Nothing; both sides support payload type.101.

NEW QUESTION 211
Which recommendation is the best practice for marking video and voice media in a cisco Unified Communications network?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 212
Refer to the exhibit. An administrator must fix the SRV records to ensure that server1.sample.com is always contacted first from the three servers. Which solution should the engineer apply to resolve this issue?

Priority = 100, Weight = 90

Priority = 10, Weight = 10

Priority = 10, Weight = 5

Priority = 5, Weight = 70

NEW QUESTION 213
Given this H.323 gateway configuration and using cisco best practices, how must the called party transformation pattern to ensure that a proper ISDN type of number is set?

https://blog.ine.com/2010/01/11/building-global-dial-plans-in-cucm7-part-iii-mapping-global- calling-party-numbers-to-their-local-variant

NEW QUESTION 214
A Cisco UCM administrator sets up new route patterns to support phones in tour different locations, all with local gateways. The administrator wants to use the same route pattern for all four locations. How must the system be configured to achieve this goal?

Use CSS alternate routing rules.

Use standard local route groups.

Add a CSS to each local gateway.

Use transforms in the route groups.

NEW QUESTION 215
Refer to the exhibit.

Refer to the exhibit. The SDP offer/answer has been completed successfully but there is no DTMF when users press keys. What is the cause of the issue?

Payload type 110 was negotiated rather than type 101.

DTMF was negotiated property in these messages.

DTMF was not negotiated on the call.

G.729 rather than G.711ulaw was negotiated.

NEW QUESTION 216
Refer to the exhibit. IP phone A makes a call to IP phone B and RTP voice stream is successfully established between the endpoints.

What option describes how to accomplish this call on phones with incompatible IP addressing versions?

Set common device configuration to IPv4 and IPv6

Set IP addressing mode preference for signalling to IPv4

Assign a media resource group with available MTPs

Enable alternative network address types

NEW QUESTION 217
Refer to the exhibit. An administrator configures a secure SIP trunk on Cisco UCM.
Which value is needed in the Secure Certificate Subject or Subject Alternate Name field to accomplish this task?

the fully qualified domain name of the remote device that is configured on the SIP trunk

the common name of the Cisco UCM CallManager certificate

the common name of the remote device certificates

the fully qualified domain name of all Cisco UCM nodes that run the CallManager service

https://www.cisco.com/c/en/us/support/docs/conferencing/meeting-server/213820-configure- cisco-meeting-server-and-cucm.html

NEW QUESTION 218
Refer to the exhibit. The translation rule is configured on the voice gateway to translate DNIS.
What is the outcome if the gateway receives 0255-343-1234 as DNIS?

The translation rule is not matched because DNIS does not end with a “$”.

The translation rule is matched and the translated number is 02553431234.

The translation rule is not matched because DNIS contains “-“.

The translation rule is matched and the translated number is 025553431234.

ISR4331(config)#voice translation-rule 10
ISR4331(cfg-translation-rule)#rule 1 /^$0[25]..$\-$…$\-$….$$/ /\1\2\3/ ISR4331#test voice translation-rule 10 0255-343-1234 Matched with rule 1 Original number: 0255-343-1234 Translated number: 02553431234 Original number type: none Translated number type: none Original number plan: none Translated number plan: none

NEW QUESTION 219
An engineer is designing a high availability and failover solution for two Cisco Unified Border Element routers. The first router (cube 1.abc.com) takes 60% of the calls and the second router (cube2 abc.com) takes
40% of the calls. Assume all DNS A records have been created. Which two SRV records are needed for a load balanced solution? (Choose two.)

_sip_udp.abc.com 60 IN SRV 1 60 cube1.abc.com

_sip_udp.abc.com 60 IN SRV 1 40 cube2.abc.com

_sip_udp.abc.com 60 IN SRV 60 1 cube1abc.com

_sip_udp.abc.com 60 IN SRV 2 60 cube1.abc.com

_sip_udp.abc.com 60 IN SRV 3 60 cube2.abc.com

NEW QUESTION 220
Which settings are needed to configure the SIP route pattern in Cisco Unified Communications Manager?

Pattern usage, IPv4 pattern, IPv6 pattern, and description

Pattern usage, IPv4 pattern, and SIP trunk/Route list

Pattern usage, IPv6 pattern, and SIP trunk/Route list

SIP trunk/Route list, description, and IPv4 pattern

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_ C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-
100_chapter_0100111.pdf

NEW QUESTION 221
Which type of input is required when configuring a third-party SIP phone?

digest user

serial number

manufacturer

authorization code

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_0_1/sysConfig/CUCM_B K_C733E983_00_cucm-system-configuration-guide-
1101/Configure___Third_Party_SIP_Phones.pdf

NEW QUESTION 222
What are two reasons that AF41 is marked for the audio and video channels of a video call? (Choose two.)

to prioritize video over other high -priority traffic classes

to give video calls a higher priority than AP41 in the QoS policy

to allow high-definition quality calls over low-speed links

to preserve lip synchronization between the audio and video channels

to provide separate classes for audio calls and video calls

NEW QUESTION 223
Refer to the exhibit. CUBE_1 and CUBE_2 must use the G.729r8 codec when communicating.
Which action completes the configuration?

Set dtmf-relay sip-notify on CUBE_1.

Deploy a voice class to CUBE_2.

Reset the dial peer on CUBE_1.

Configure a transcoder on CUBE_1.

NEW QUESTION 224
A DTMF mismatch is occurring between an MGCP gateway registered FXS port and a Cisco Unified communications Manager SIP trunk. Which media resource can be leveraged to interwork this mismatch?

Media Termination point

Conference Bridge

Annunciator

Trusted relay point

NEW QUESTION 225
An administrator is configuring a new Cisco UCM with PSTN capabilities. Due to bandwidth constraints, audio compression is used on the codec. DTMF must work as expected because the customer is calling many call centers where the users must select options in the call. Where is DTMF out-of-band in a CCM 12.5 with SIP-based gateway configured?

in the DTMF setting under SIP profile on the Cisco Unified Border Element

in the dial peer on the Cisco IOS router

in regions on the Cisco UCM where the appropriate codec to use is set

in DTMF settings in the audio codec preference list under regions in the Cisco UCM

NEW QUESTION 226
Which two functions are provided by Cisco Expressway Series? (Choose two.)

voice and video transcoding

voice and video conferencing

interworking of SIP and H.323

intercluster extension mobility

endpoint registration

The Cisco Expressway Series provides the following functions:
Voice and video transcoding
Interworking of SIP and H.323
Firewall traversal
Session border controller (SBC) functionality
Endpoint registration
Call admission control (CAC)
Quality of service (QoS)
Security
The Cisco Expressway Series does not provide voice and video conferencing or intercluster extension mobility.

NEW QUESTION 227
An engineer wants to manually deploy a Cisco Webex DX80 video endpoint to an end user. Which type of provisioning can be configured on the endpoint?

CUC

CUBE

CMS

Edge

NEW QUESTION 228
An engineer configures Cisco UCM to prevent toll fraud. At which two points does the engineer block the pattern in Cisco UCM to complete this task? (Choose two.)

partition

route partem

translation pattern

CSS

route group

Loading …