[Oct-2023] Dumps Practice Exam Questions Study Guide for the HPE7-A01 Exam [Q43-Q62]

October 26, 2023 HPE7-A01, HP 0 Comments

[Oct-2023] Dumps Practice Exam Questions Study Guide for the HPE7-A01 Exam [Q43-Q62]

Rate this post

[Oct-2023] Dumps Practice Exam Questions Study Guide for the HPE7-A01 Exam

HPE7-A01 Dumps with Practice Exam Questions Answers

HP HPE7-A01 certification exam is a valuable credential for IT professionals who wish to enhance their skills and knowledge in Aruba wireless networking solutions. Aruba Certified Campus Access Professional Exam certification not only validates the candidate’s knowledge and skills in designing and implementing Aruba wireless networks but also demonstrates their commitment to professional development and career advancement.

NO.43 What is the order of operations tor Key Management service for a wireless client roaming from AP1 to AP2?

NO.44 Your customer has asked you to assign a switch management role for a new user The customer requires the user role to only have Web Ul access to the System > Log page and only have access to the GET method for REST API for the /logs/event resource Which default AOS-CX user role meets these requirements?

administrators

auditors

sysops

operators

NO.45 The administrator notices that wired guest users that have exceeded their bandwidth limit are not being disconnected Access Tracker in ClearPass indicates a disconnect CoA message is being sent to the AOS-CX switch.
An administrator has performed the following configuration

What is the most likely cause of this issue?

Change of Authorization has not been globally enabled on the switch

The SSL certificate for CPPM has not been added as a trust point on the switch

There is a mismatch between the RADIUS secret on the switch and CPPM.

There is a time difference between the switch and the ClearPass Policy Manager

NO.46 In an ArubaOS 10 architecture using an AP and a gateway, what happens when a client attempts to join the network and the WLAN is configured with OWE?

Authentication information is not exchanged

The Gateway will not respond.

No encryption is applied.

RADIUS protocol is utilized.

NO.47 Match the terms below to their characteristics (Options may be used more than once or not at all.)

NO.48 You must ensure the HPEAruba network you are configuring for a client is capable of plug-and-play provisioning of access points. What enables this capability?

UCC Service

LLDP-MED

SRTP

CSMA

NO.49 You are helping an onsite network technician bring up an Aruba 9004 gateway with ZTP for a branch office The technician was to plug in any port for the ZTP process to start Thirty minutes after the gateway was plugged in new users started to complain they were no longer able to get to the internet. One user who reported the issue stated their IP address is 172.16 0.81 However, the branch office network is supposed to be on 10.231 81.0/24.
What should the technician do to alleviate the issue and get the ZTP process started correctly?

Turn off the DHCP scope on the gateway, and set DNS correctly on the gateway to reach Aruba Activate

Move the cable on the gateway from port G0/0V1 tc port G0 0.0

Move the cable on the gateway to G0/0/1. and add the device’s MAC and Serial number in Central

Factory default and reboot the gateway to restart the process.

NO.50 Two AOS-CX switches are configured with VSX at the the Access-Aggregation layer where servers attach to them An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the VSX switches.

What is correct about access from the servers to the Core? (Select two.)

Server 1 can access the core layer via the keepalrve link

Server 2 can access the core layer via the keepalive link

Server 2 cannot access the core layer.

Server 1 can access the core layer via both uplinks

Server 1 and Server 2 can communicate with each other via the core layer

Server 1 can access the core layer on only one uplink

NO.51 For the Aruba CX 6400 switch, what does virtual output queueing (VOQ) implement that is different from most typical campus switches?

large ingress packet buffers

large egress packet buffers

per port ASICs

VSX

NO.52 For the Aruba CX 6400 switch, what does virtual output queueing (VOQ) implement that is different from most typical campus switches?

large ingress packet buffers

large egress packet buffers

per port ASICs

VSX

NO.53 A company recently deployed new Aruba Access Points at different branch offices Wireless 802.1X authentication will be against a RADIUS server in the cloud. The security team is concerned that the traffic between the AP and the RADIUS server will be exposed.
What is the appropriate solution for this scenario?

Enable EAP-TLS on all wireless devices

Configure RadSec on the AP and Aruba Central.

Enable EAP-TTLS on all wireless devices.

Configure RadSec on the AP and the RADIUS server

NO.54 Match the topics of an AOS10 Tunneled mode setup between an AP and a Gateway. (Options may be used more than once or not at all.)

NO.55 Match the solution components of NetConductor (Options may be used more than once or not at all.)

Explanation
Client Insights matches with Built in , AI powered client visibility and fingerprinting capability that leverages infrastructure telemetry and ML based classification models to eliminate network bling spots Client Insights is a solution component of NetConductor that provides built-in, AI-powered client visibility and fingerprinting capability that leverages infrastructure telemetry and ML-based classification models to eliminate network blind spots. Client Insights uses machine learning to automatically detect, identify, and classify devices on the network, such as IoT devices, BYOD devices, or rogue devices. Client Insights also provides behavioral analytics and anomaly detection to monitor device performance and security posture.
Client Insights helps network administrators gain visibility into the device landscape, enforce granular access policies, and troubleshoot issues faster. References:
https://www.arubanetworks.com/products/network-management-operations/central/netconductor/
https://www.arubanetworks.com/assets/wp/WP_NetConductor.pdf
Cloud Auth matches with Enables fictionless onboarding of end users and client devices either through MAC address-based authentication or through integrations with common cloud identity stores Cloud Auth is a solution component of NetConductor that enables frictionless onboarding of end users and client devices either through MAC address-based authentication or through integrations with common cloud identity stores. Cloud Auth is a cloud-native network access control (NAC) solution that is delivered via Aruba Central. Cloud Auth allows network administrators to define user and device groups, assign roles and policies, and enforce access control across wired and wireless networks. Cloud Auth supports MAC authentication for devices that do not support 802.1X, as well as integrations with cloud identity providers such as Azure AD, Google Workspace, Okta, etc. References:
https://www.arubanetworks.com/products/network-management-operations/central/netconductor/
https://www.arubanetworks.com/assets/wp/WP_NetConductor.pdf
The Fabric Wizard matches with Simplifies the creation of the overlays using an intuitive graphical user interface and automatic generation of configuration instructions that are pushed to switches and gateways The Fabric Wizard is a solution component of NetConductor that simplifies the creation of the overlays using an intuitive graphical user interface and automatic generation of configuration instructions that are pushed to switches and gateways. The Fabric Wizard is a tool that allows network administrators to design, deploy, and manage overlay networks using VXLAN and EVPN protocols. The Fabric Wizard provides a graphical representation of the network topology, devices, and links, and allows users to drag and drop virtual components such as VRFs, VLANs, and subnets. The Fabric Wizard also generates the configuration commands for each device based on the user input and pushes them to the switches and gateways via Aruba Central. References:
https://www.arubanetworks.com/products/network-management-operations/central/netconductor/
https://www.arubanetworks.com/assets/wp/WP_NetConductor.pdf
Policy Manager matches with Defines user and device groups and creates the associated traffic routing and access enforcement rules for the physical network Policy Manager is a solution component of NetConductor that defines user and device groups and creates the associated traffic routing and access enforcement rules for the physical network. Policy Manager is a tool that allows network administrators to create and manage network policies based on user and device identities, roles, and contexts. Policy Manager uses Group Policy Identifier (GPID) to carry policy information in traffic for in-line enforcement. Policy Manager also integrates with Cloud Auth, ClearPass, or third-party solutions to provide flexible network access control. References:
https://www.arubanetworks.com/products/network-management-operations/central/netconductor/
https://www.arubanetworks.com/assets/wp/WP_NetConductor.pdf

NO.56 Which method is used to onboard a new UXI in an existing environment with 802 1X authentication? (The sensor has no cellular connection)

Use the UXI app on your smartphone and connect the UXI via Bluetooth

Use the Aruba installer app on your smartphone to scan the barcode

Connect the new UXI from an already installed one and adjust the initial configuration.

Use the CLI via the serial cable and adjust the initial configuration.

NO.57 A network engineer recently identified that a wired device connected to a CX Switch is misbehaving on the network To address this issue, a new ClearPass policy has been put in place to prevent this device from connecting to the network again.
Which steps need to be implemented to allow ClearPass to perform a CoA and change the access for this wired device? (Select two.)

Configure dynamic authorization on the switch.

Bounce the switchport

Use Dynamic Segmentation.

Confirm that NTP is configured on the switch and ClearPass

Configure dynamic authorization on the switchport

NO.58 A customer is using a legacy application that communicates at layer-2. The customer would like to keep this application working to a remote site connected via layer-3 All legacy devices are connected to a dedicated Aruba CX 6200 switch at each site.
What technology on the Aruba CX 6200 could be used to meet this requirement?

Inclusive Multicast Ethernet Tag (IMET)

Ethernet over IP (EolP)

Generic Routing Encapsulation (GRE)

Static VXLAN

NO.59 A company deployed Dynamic Segmentation with their CX switches and Gateways After performing a security audit on their network, they discovered that the tunnels built between the CX switch and the Aruba Gateway are not encrypted. The company is concerned that bad actors could try to insert spoofed messages on the Gateway to disrupt communications or obtain information about the network.
Which action must the administrator perform to address this situation?

Enable Secure Mode Enhanced

Enable Enhanced security

Enable Enhanced PAPI security

Enable GRE security

NO.60 A customer is using Aruba Cloud Guest, but visitors keep complaining that the captive portal page keeps coming up after devices go to sleep Which solution should be enabled to deal with this issue?

MAC Caching under the splash page

MAC Caching under the user-role

Wireless Caching under the splash page

MAC Caching under the WLAN

NO.61 With the Aruba CX 6200 24G switch with uplinks or 1/1/25 and 1/1/26, how do you protect client ports from forming layer-2 loops?

int 1/1/1-1/1/24, loop-protect

int 1/1/1-1/1/28. loop-protect

int 1/1/1-1/1/28. loop-guard

int 1/1/1-1/1/24. loop-guard

NO.62 Due to a shipping error, five (5) Aruba AP-515S and one (1) Aruba CX 6300 were sent directly to your new branch office You have configured a new group persona for the new branch office devices in Central, but you do not know their MAC addresses or serial numbers The office manager is instructed via text message on their smartphone to onboard all the new hardware into Aruba Central What application must the office manager use on their phone to complete this task?

Aruba Onboard App

Aruba Central App

Aruba CX Mobile App

Aruba installer App