100% Free Real Updated SCP-NPM Questions & Answers Pass Your Exam Easily [Q13-Q30]

July 30, 2024 SCP-NPM, SolarWinds 0 Comments

100% Free Real Updated SCP-NPM Questions & Answers Pass Your Exam Easily [Q13-Q30]

4/5 - (1 vote)

100% Free Real Updated SCP-NPM Questions & Answers Pass Your Exam Easily

Easily To Pass New SCP-NPM Verified & Correct Answers

NEW QUESTION 13
You add several nodes for monitoring and can see detailed information on those nodes in the Orion Web Console. However, when you look at the nodes in Orion Maps, the connections between the nodes are not showing. What is a likely reason?

A firewall is blocking polling between the nodes and the Orion server

You did not enable Layer 2 and Layer 3 topology polling on those nodes

You did not add the node topology OIDs to the MIB database

You did not enable SNMP polling

NEW QUESTION 14
What is the most time-efficient way to create a report in NPM that shows the top 50 interfaces by percent utilization?

Create an interface report and use a filter to restrict to the top 50

Edit the default top 25 interfaces by percent utilization report and update to the top 50

Run the default top 25 interfaces by percent utilization report for different timeframes

Create a new advanced SQL query report

NEW QUESTION 15
Which metrics can NPM monitor on an Ethernet switch? (Choose all that apply.)

Configuration changes

Buffer misses

Duplex mismatches

CPU utilization

NEW QUESTION 16
You created a Universal Device Poller (UnDP) but cannot find an OID in the MIB tree. How do you resolve this issue?

Restart the Universal Device Poller

Update the MIB database

Rediscover the node via Network Sonar Discovery

Add the node to NPM for monitoring

NEW QUESTION 17
How does NPM calculate capacity usage trends?

Volume capacity

Average calculation

Capacity forecasting widget

Historical data

NEW QUESTION 18
How does NPM calculate capacity usage trends?

Volume capacity

Average calculation

Capacity forecasting widget

Historical data

NEW QUESTION 19
You need to add a new subnet of 500 devices for monitoring. What is the first step to incorporate these devices into NPM?

Collect NetFlow from a core router

Perform a Network Discovery

Measure network-wide bandwidth consumption

Add the nodes using the Add Node feature in Manage Nodes

NEW QUESTION 20
You monitor three Cisco routers with NPM. NPM reports utilization statistics for two of the routers. NPM only shows Availability and Response Time statuses for the third router. Why do you not see utilization statistics on the third router?

SNMP is not configured correctly on the third node

The third node is monitored with WMI instead of SNMP

The third node is monitored with the NPM agent

The third node is monitored with SNMP instead of ICMP

NEW QUESTION 21
You want to limit a user to only monitor Windows servers and not be able to view other devices that NPM monitors. How can you do this?

Account limitations

View permissions

Account views

Alert limitations

NEW QUESTION 22
How can you add entities from NPM to monitor for all registered devices in your company domain?

Select to query Domain Controllers in a Network Discovery and then select the Organizational Units (OUs) with the registered devices you want to scan

Add each registered device individually, and then select the entities you want to monitor

Add each of your Domain Controllers as nodes to NPM and scan Active Directory Organization Units (OUs) for the registered devices

Use the NPM Active Directory Discovery tool to find all registered devices on the domain

NEW QUESTION 23
Users report that email is slow. The Exchange team reports that everything is normal on the mail servers. What NPM statistic can you look at to find what might be causing the issue?

Network bandwidth utilization

Mail queue length on the Exchange server

Server component monitor status

SMTP service on the Exchange server

NEW QUESTION 24
You want to create a custom poller for a device. When you select the OID you get an “OID not supported” error. What does this mean?

The SNMP string that you used is incorrect

The SNMP agent on the device does not report on this OID

This OID requires the read/write community string

Your firewall is blocking SNMP requests

An OID (Object Identifier) is a unique identifier for a specific variable in a MIB (Management Information Base) that can be polled or monitored by SNMP (Simple Network Management Protocol). However, not all OIDs are supported by all devices or SNMP agents, which are software components that collect and report the MIB data. If you select an OID that is not supported by the device or the SNMP agent, you will get an “OID not supported” error when you try to create a custom poller for that device in NPM (Network Performance Monitor). This means that the device or the SNMP agent does not have the information for that OID or does not respond to the SNMP request for that OID12.
To resolve this issue, you can try the following steps34:
Verify that the device supports the OID that you want to monitor. You can use the MIB Browser or the MIB Walk tool to browse the MIB tree of the device and find the OID. You can also check the device vendor’s documentation or website for the supported OIDs and MIBs.
Verify that the SNMP agent on the device is configured properly and has the latest version. You may need to update the SNMP agent or enable some features or extensions to support the OID. You can also check the SNMP agent’s logs or status for any errors or warnings.
Verify that the SNMP credentials and settings are correct and match the device’s configuration. You may need to use a different SNMP version, community string, port, or timeout value to communicate with the device. You can also test the SNMP connectivityusing the SNMP Test tool or the Test button in the UnDP (Universal Device Poller) application.
Verify that there are no network issues or firewalls that are blocking the SNMP traffic between the NPM server and the device. You may need to allow the SNMP protocol and port on the firewall or router, or use a different network path or interface to reach the device. You can also use the Ping or Traceroute tools to check the network connectivity and latency.
References: 1: What is an OID?5, 2: The OID is not supported, 3: Troubleshoot Unknown Nodes, 4:
Troubleshoot SNMP issues

NEW QUESTION 25
When a router monitored by NPM reboots, the interface indexes statuses change to unknown in NPM. What do you do after you remove the unknown interfaces?

Update the NPM internal ID numbers

Manually update the interface indexes

Rum a list of resources on that node and add the interfaces with the updated index IDs

Run the Configuration Wizard to update the interface indexes

NEW QUESTION 26
Which metrics can NPM monitor on an Ethernet switch? (Choose all that apply.)

Configuration changes

Buffer misses

Duplex mismatches

CPU utilization

NEW QUESTION 27
How can you extend NPM’s monitoring to non-standard devices?

Using OIDs organized in MIBs

Combining licenses from different products

Deploying Orion agents

Polling with non-standard protocols

NEW QUESTION 28
You added a device for NPM to monitor. You can see CPU and memory statistics, but want to see a statistic that NPM does not support out of the box. Which features can you use to collect the statistics you want from the device? (Choose all that apply.)

Manage Pollers in Device Studio

Device templates

Universal Device Pollers (UnDP)

Application monitor templates

NEW QUESTION 29
NPM polls static properties, and calculates bandwidth consumption based on the total amount of _____ coming through the firewall.

Bytes

Kilobytes

Megabytes

Nibbles

NEW QUESTION 30
You can import device-specific MIBs into the SolarWinds MIB Database, but you cannot import UnDP pollers based on OIDs from device-specific MIBs.

True

False