[Sep 12, 2024] Fast Exam Updates HPE0-S60 dumps with PDF Test Engine Practice [Q25-Q44] : Exams Labs Braindumps : http://blog.examslabs.com

Q25. Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.

Q26. The proposal consists of.
– 3 HPE Synergy 12000 frames
– 6 HPE Composer 2 modules
– 2 HPE Virtual Connect SE 100 GO F32 Module
– 4 HPE Synergy 50 GO interconnect Link Module
Which statements about this proposed design are true? (Select two.)

The selected interconnect modules do not provide the requested WWN virtualization

HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100 GO F32 modules

The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules

FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added

Remove 4 HPE Composer 2 modules from the design, as they are not required

Q27. Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61 Which statement about this update process is true?

To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.

The customer can update directly to 6,1, but HPE OneView downtime will be longer.

Before updating to 6,1, customer should increase memory size on the HPE Composer.

The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.

Q28. Which statement about the SY480 Gen10 Plus Compute Module is true?

It cannot be mixed with Gen9 compute modules in the same frame.

It supports 8 memory channels and memory DIMMs of up to 256GB.

It only supports NVDIMM Persistent Memory.

It supports “3rd Gen AMO EPYC Server Processors with 64 cores.

Q29. Which statement about a new HPE SimpliVity deployment is true?

New HPE SimpliVity deployments give customer flexible choice of hypervisor

All new HPE SimpliVity models are based on AMD CPUs

All new HPE SimpliVity models support deduplication and compression

New HPE SimpliVity deployments are licensed per node not per physical socket

Q30. Your customer manages HPE Synergy using HPE OneView. For one of its projects, the company purchased 50 HPE.
ProLiant DK385 Gen10 Plus v2. They plan to manage the new systems using HPE OneView as well.
What should the customer do to manage rack system using HPE OneView?

add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.

connect the rack system to an IPDU and add the IPDU to the HPE. OneView instance that is used for HPE synergy management.

Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.

Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.

Q31. Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?

HPE ProLiant DL580 Gen10

HPE ProLiant OL380 Gen 10 Plus

HPE Synergy 480 Gen10 Plus

HPE Superdome Flex system

Q32. Refer to the exhibit.

Which statement about this logical interconnect group is true?

The master modules are located in the interconnect bays 2 and 5

For the given downlink speed, the maximum number of frames is reached

Both master modules are located in the same HPE Synergy frame

To use interconnect bay set 3, all compute nodes must be half-height

Q33. Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.

Q34. After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.

Q35. Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
– HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
– Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
– An appropriate number of vSAN Standard licenses for each compute node
– One HPE O3940 Storage Module with 40 SSDs – All required cables and options Which statement about this request is true?

vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses

vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN

One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.

Q36. Which compute node parameters are captured within server hardware type?

Number of the CPUs

installed operating system

Mezzanine card configuration

Size of the memory Installed

Q37. Put the steps of the HPE infosight flow in the correct order.

Q38. Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?

Loop protection

Storm control

LLDP tagging

Pause flood protection

Q39. You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.

Q40. Which statement about HPE Superdome nPars is true?

Chassis in the same nPar can have different CPU configuration

Rack Management Controller is required Tor nPar configuration

Chassis in the same nPar can have different memory configuration

nPars are supported only with 3rd Generation Intel Xeon Scalable Processors

Q41. Which statement about a new HPE SimpliVity deployment is true?

New HPE SimpliVity deployments give customer flexible choice of hypervisor

All new HPE SimpliVity models are based on AMD CPUs

All new HPE SimpliVity models support deduplication and compression

New HPE SimpliVity deployments are licensed per node not per physical socket

Q42. You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?

if both FiexNICs are configured with the same speed

If the logical enclosure is built on at least three HPE Synergy frames

if both FiexNICs are connected to different networks

if the logical enclosure is configured with redundant master modules

Q43. Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?

HPE OneView method for I/O firmware update procedure

RMC CLI to update I/O and HPE Persistent Memory firmware

HPE OneView IT HPE Persistent Memory firmware must be updated.

HPE SUM if HPE Persistent Memory firmware must be updated

Q44. Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

If the D3940 module is imported in managed state that allows volume provisioning.

If there Is a logical interconnect created based on the 12Gb SAS switches.

If the D3940 storage module is property licensed through HPE OneView interface.

If there is at least one ISCSI network configured that will provide access to the module.