This page was exported from Exams Labs Braindumps [ http://blog.examslabs.com ] Export date:Tue Apr 1 3:05:30 2025 / +0000 GMT ___________________________________________________ Title: Get New 2024 Valid Practice Aruba Certified Switching Professional (ACSP) V1 HPE6-A73 Q&A - Testing Engine [Q51-Q66] --------------------------------------------------- Get New 2024 Valid Practice Aruba Certified Switching Professional (ACSP) V1 HPE6-A73 Q&A - Testing Engine HPE6-A73 Dumps PDF - 100% Passing Guarantee The HP HPE6-A73 exam covers a wide range of topics such as ArubaOS-CX configuration and management, VLANs and trunking, link aggregation, spanning tree protocols, and advanced switching technologies like Virtual Switching Framework (VSF) and Intelligent Resilient Framework (IRF). The HPE6-A73 certification exam provides the necessary skills and knowledge to configure and troubleshoot Aruba switching solutions, making it an essential certification for IT professionals working in medium to large-scale enterprise networks.   NO.51 What is required when implementing captive portal an AOS-CX switches?  Certificate installed on the switch  Web server running on the switch  Device fingerprinting  AAA server NO.52 An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concernedthat when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affectnetwork connectivity especially VoIP calls, in the connected access layer switches What should the administrator do on the aggregation layer switches to alleviate this issue?  Implement bidirectional forwarding detection (BFD).  Reduce the hello and dead interval timers  implement route aggregation  implement graceful restart NO.53 Examine the commands entered on an AOS-CX switch:What is true regarding this configuration for traffic received on interface 100?  The traffic is always dropped if the next-hop addresses are unreachable.  The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2.  The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable.  The default next-hop address supersedes the two preceding next-hop addresses. NO.54 An administrator of a company has concerns about upgrading the access layer switches The users rely heavily on wireless and VoIP telephony Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?  Implement VSX on the AOS-CX access switches  Install the in-service software upgrade (ISSU) feature with clustering enabled  Implement VSF on the AOS-CX access switches  install AOS-CX 6300 or 6400 switches with always-on POE. NO.55 Examine the configuration of Core-1 and Core-2. AOS-CX switches configured as a VSX stack:Core1: Interlace lag 256no shutdownno routingvlan trunk allowed alllacp mode active Interface 1/1/46no shutdownlag 256 Interface 1/1/47no shutdownlag 256VSXInter-switch-link lag 256vsx-sync vsx-globalexitCofe2: interlace lag 250no shutdownno routingvlan trunk allowed alllacp mode activeInterlace 1/1/46no shutdownlag 256 Interface 1/1/47no shutdownlag 256 vsxinter-switch-link lag 256exitWhen using the “show vsx status” command, the two switches fall to connect and successfully synchronize. What should the administrator do to fix this issue?  Define a larger MTU on the ISL link of the two switches.  Define the VSX roles on the two switches.  Enable active-active forwarding on the two switches. NO.56 A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.What is correct about how the company should implement a security solution where the wired traffic is processed by the MCs?  Implement downloadable user roles with a gateway role defined on the AOS-CX switches  Implement local user roles with a gateway role defined on the AOS-CX switches  Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs  Implement downloadable user roles with a device role defined on the AOS-CX switches and MCs NO.57 Examine the following AOS-CX configuration:Based on this configuration, which statement is correct regarding IoT traffic?  If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch  If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2  The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch  All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2 NO.58 Which AOS-CX switches support weighted fair queuing (WFQ)?  Both 8320 and 8325  Both 6300 and 6400  8400 only  6300 only NO.59 A customer has twenty AOS-CX switches that will be managed by NetEdit and would like support for NetEdit these switches will exist in the network for at least five years.Which type of licensing should be used by this customer?  20 Aruba NetEdit permanent licenses  20 Aruba NetEdit single node subscription licenses  25 Aruba NetEdit permanent licenses  1 Aruba NetEdit SMB License NO.60 How is NetEdit installed at a customer location?  Via me Aruba Central cloud solution  Via an Aruba NetEdit hardware appliance  Via a DVD using a virtualized platform like Microsoft’s Hyper-V  Via an OVA file and a virtualized platform like VMware’s ESXi NO.61 An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D  Implement route aggregation  Implement bidirectional forwarding detection (BFD)  Reduce the hello and dead interval timers  Implement graceful restart NO.62 Examine the network topology.The network is configured for OSPF with the following attributes:Here is the OSPF configuration performed on Core1:Based on the above information, what is correct?  ISP 1 is not reachable from any area.  Corel has received one type 5 LSA from the ASBR.  Area 0 has 81 routes  Area 1 has 23 routes NO.63 An administrator wants to use an existing Aruba gateway’s firewall policies to filter both wireless and wired traffic. Which AOS-CX switch feature should a customer implement to ensure the gateway applies the same or similar firewall policies to users’ wired and wireless traffic?  GRE tunneling  User-based tunneling  Port-based tunneling  IPSec tunneling NO.64 An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:Based on this output, what is the state of the user’s access?  No downloadable user role exists  MAC authentication has passed, but 802.1X authentication is in progress  The RADIUS request timed out to the AAA server  The port should be configured for 802.1X NO.65 An administrator is designing an access layer solution in a data center. A key requirement is to dual-home mission-critical server connections to two different switches, ensuring that the servers always have network access, even during switch software upgrades. This feature should support strictly-controlled provisioning.What would best meet the administrator’s needs when deploying AOS-CX switches?  VSF  Dynamic segmentation  VSX  NAE NO.66 Examine the attached exhibit.The network administrators is trying to add a remote location as area 3 to the network shown in the diagram.Based on current connection restrictions, the administrator cannot connect area 3 directly to area 0. The network is using AOS-CX switches.Which feature should the administrator implement to provide connectivity to the remote location?  Not-so-stubby areas  Bidirectional forward detection (BFD)  OSPFv3  Virtual links  Loading … HP HPE6-A73 exam is a vendor-specific certification exam and is designed specifically for IT professionals who work with Aruba switching solutions. HPE6-A73 exam is based on the latest technology and industry best practices and is regularly updated to ensure that it remains relevant and in line with industry standards.   HPE6-A73 Braindumps Real Exam Updated on Dec 12, 2024 with 130 Questions: https://www.examslabs.com/HP/Aruba-Certified-Switching-Professional-ACSP-V1/best-HPE6-A73-exam-dumps.html --------------------------------------------------- Images: https://blog.examslabs.com/wp-content/plugins/watu/loading.gif https://blog.examslabs.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-12-12 15:54:37 Post date GMT: 2024-12-12 15:54:37 Post modified date: 2024-12-12 15:54:37 Post modified date GMT: 2024-12-12 15:54:37