Pass Your Exam Easily! H13-611_V4.5-ENU Real Question Answers Updated on Aug 17, 2023 [Q285-Q304]

August 17, 2023 H13-611_V4.5-ENU, Huawei 0 Comments

Pass Your Exam Easily! H13-611_V4.5-ENU Real Question Answers Updated on Aug 17, 2023 [Q285-Q304]

Rate this post

Pass Your Exam Easily! H13-611_V4.5-ENU Real Question Answers Updated on Aug 17, 2023

Actual Questions Answers Pass With Real H13-611_V4.5-ENU Exam Dumps

NO.285 The SCSI protocol is the basic protocol for communication between the host and the disk. It is operated by the SCSI controller. The controller is equivalent to a small CPU with its own command set and cache.

True

False

NO.286 Users of a company can automatically report the alarm of the storage device connected to it to the Huawei Service Support Center through a management software. Excuse me, what software is this user using?

DeviceManager

CLI management interface

Toolkit

eService

NO.287 In order to access the bearer server, the data center establishes the infrastructure, which can be divided according to the business? (Multiple Choice)

Operating the data center

Internet Data Center

Enterprise Data Center

Cloud Data Center

NO.288 Which of the following is incorrect regarding the differences of IP SAN and FC SAN?

IP SAN uses iSCSI protocol for data transmission.

IP SAN can connect to FC SAN without any additional protocols.

FC SAN uses FC protocol for data transmission

Both encapsulates the SCSI command with their underlying protocol before transmission

IP SAN and FC SAN are different types of storage area networks (SANs) that use different protocols for data transmission.
IP SAN uses the iSCSI protocol for data transmission. It is a block-level protocol that allows data to be transferred over IP networks and it allows to connect hosts and storage systems over long distances using standard Ethernet networks.
FC SAN uses the Fibre Channel (FC) protocol for data transmission. It is a dedicated protocol that uses a dedicated cabling and a specialized switch infrastructure to connect hosts and storage systems.
Both IP SAN and FC SAN encapsulate the SCSI command with their underlying protocol before transmission, but they cannot connect to each other without additional protocols such as Fibre Channel over IP (FCIP) or Internet SCSI (iSCSI) which are used to tunnel Fibre Channel or iSCSI over an IP network.

NO.289 Which of the following statements about LAN-based backup is incorrect?

Instruction flows are transmitted over the LAN whereas data flows are not.

The backup agent affects the performance of application servers.

Backup data is based on LANs, affecting network performance.

Backup jobs must be separately maintained, complicating management and maintenance.

NO.290 Regarding the commonly used components of ICT, which of the following statements is correct? (Multiple choice)

Common components of ICT include hosts, storage arrays, switches, and networks

Hosts are also called servers, which refer to computers with higher specifications in some enterprises

Storage array usually refers to the equipment that provides data storage

The switch is also called the switching hub, which mainly works on the three-layer network

NO.291 Host is a computing system consisting of hard drives or file system that can provide data access and storage.

TRUE

FALSE

A host is a computing system, but it does not necessarily consist of hard drives or file systems. A host can provide data access and storage, but it can also provide other services and functions, such as running applications or providing access to other networks and systems.
https://www.techtarget.com/searchstorage/definition/storage-area-network-SAN What Is a Storage Area Network? SAN Explained
https://www.techtarget.com/searchstorage/definition/storage-area-network-SAN
https://www.ibm.com/topics/storage-area-network
What is a Storage Area Network (SAN)? SAN Defined | IBM
https://www.ibm.com/topics/storage-area-network
https://www.techtarget.com/searchstorage/definition/network-attached-storage What Is Network-Attached Storage (NAS)? A Complete Guide …
https://www.techtarget.com/searchstorage/definition/network-attached-storage

NO.292 Incremental backup requires the last full backup and each incremental backup to fully restore dat a. Data reconstruction is therefore slower compared with full backups.

TRUE

FALSE

NO.293 The SmartTier intelligent data grading feature requires three types of hard drives in the storage pool.

TRUE

FALSE

NO.294 Which of the following statements is incorrect?

A logical volume can reside on multiple physical disks. Data storage can be physically discontinuous.

A volume group is built on physical volumes. A volume group can contain one physical volume group or multiple physical volumes.

Physical volumes reside on the lowest layer in the logical volume manager. Logical volumes and volume groups are dependent on physical volumes.

Multiple volume groups can be created on the space of a logical volume.

NO.295 It provides connection between sets of nodes and allows the connected devices(nodes) to communicate with each other but it is not a device. Which of the following fits the above description?

Host.

Network.

Storage Array.

Switch.

NO.296 Statement 1: NAS file system is managed by storage or server that provides resources.
Statement 2: The file system of the SAN is managed by the host itself.

Statement 1 is correct, Statement 2 is correct

Statement 1 is correct, Statement 2 is wrong

Statement 1 is wrong, Statement 2 is correct

Statement 1 is wrong, Statement 2 is wrong

NO.297 Description 1: There is an interconnection line between the controllers of the storage system. If the controller is broken, it belongs to it.
The working controller of the managed LUN will be switched to a working controller.
Description 2: The working controller and home controller of a LUN must be unified into one controller.

Description 1 is correct, description 2 is correct

Description 1 is wrong, description 2 is correct

Description 1 error, description 2 error

Description 1 is correct, description 2 is incorrect

NO.298 Which of the following are common RAID types. (Multiple Choice)

RAID 1

RAID 5

RAID 0+1

RAID 50

NO.299 Which of the following steps does the CIFS protocol work need to go through?

Protocol handshake-file operation-security authentication-sharing connection-disconnection

Protocol handshake-file operation-sharing connection-security authentication-disconnection

Protocol handshake-security authentication-shared connection-file operation-disconnection

Protocol handshake-sharing connection-security authentication-file operation-disconnection

NO.300 Storage controllers can be separated from the chassis of disk enclosures. It does not need to be integrated in design with the disk enclosures.

TRUE

FALSE

NO.301 A company’s applications and data have high security requirements. During the inspection, it was found that two NL-SAS hard disks were offline and the data was lost. In order to avoid this situation, it is necessary to complete the RAID configuration and require the utilization of the hard disk. To be greater than 60%, which of the following are eligible? (Multiple Choice)

Use 6+2P hard drives to create RAID 6

Use 4+P hard disk to create RIAD 5

Use 4+2P hard drives to create RAID 6

Use 2+2P hard drives to create RAID 6

NO.302 The following describes RAID 10, which are correct? (Multiple choice)

RAID 10 is used in scenarios with high requirements for speed and fault tolerance

RAID 10 requires at least 4 member disks

In RAID 10, if two member disks in a subgroup fail, the data is read normally

In RAID 10, the data is first mirrored and then striped

NO.303 Select the correct statements that describes the properties of bus technology in ICT architecture. (Choose all that apply.)

Bus technology are only available in serial form.

Bus can be divided into internal bus and external bus.