Real 200-301 Dumps - Cisco Correct Answers updated on 2025 [Q181-Q199] : Exams Labs Braindumps : http://blog.examslabs.com

NR. 181 A user configured OSPF in a single area between two routers A serial interface connecting R1 and R2 is running encapsulation PPP By default which OSPF network type is seen on this interface when the user types show ip ospf interface on R1 or R2?

port-to-multipoint

broadcast

point-to-point

nonbroadcast

NR. 182 How does a Cisco Unified Wireless network respond to Wi-Fi channel overlap?

It alternates automatically between 2.4 GHz and 5 GHz on adjacent access points

It allows the administrator to assign channels on a per-device or per-interface basis.

It segregates devices from different manufacturers onto different channels.

It analyzes client load and background noise and dynamically assigns a channel.

NR. 183 Siehe dazu die Abbildung.

An engineer is configuring the router to provide static NAT for the webserver Drag and drop the configuration commands from the left onto the letters that correspond to its position in the configuration on the right.

NR. 184 What is the primary different between AAA authentication and authorization?

Authentication verifies a username and password, and authorization handles the communication between the authentication agent and the user database.

Authentication identifies a user who is attempting to access a system, and authorization validates the users password

Authentication identifies and verifies a user who is attempting to access a system, and authorization controls the tasks the user can perform.

Authentication controls the system processes a user can access and authorization logs the activities the user initiates

NR. 185 Refer to the exhibit. Based on the LACP neighbor status, in which mode is the SW1 port channel configured?

passive

mode on

auto

active

NR. 186 Siehe dazu die Abbildung.

Was ist die Auswirkung dieser Konfiguration?

All ARP packets are dropped by the switch

Egress traffic is passed only if the destination is a DHCP server.

All ingress and egress traffic is dropped because the interface is untrusted

The switch discard all ingress ARP traffic with invalid MAC-to-IP address bindings.

NR. 187 Router R1 must send all traffic without a matching routing-table entry to 192.168.1.1. Which configuration accomplishes this task?

Option A

Option B

Option C

Option D

NR. 188 Refer to the exhibit. Which configuration issue is preventing the OSPF neighbor relationship from being established between the two routers?

R1 has an incorrect network command for interface Gi1/0.

R2 should have its network command in area 1.

R1 interface Gi1/0 has a larger MTU size.

R2 is using the passive-interface default command.

NR. 189 Which output displays a JSON data representation?

Option A

Option B

Option C

Option D

NR. 190 Ein Router, auf dem EIGRP läuft, hat dieselbe Route von zwei verschiedenen Pfaden gelernt Welchen Parameter verwendet der Router, um den besten Pfad auszuwählen?

Kosten

administrative Entfernung

metrisch

as-path

NR. 191 Which two benefits are provided by cloud resources to an enterprise network? (Choose two )

full control of infrastructure

complexity at higher cost

Flexibilität

on-demand scalability

easy access with low security

NR. 192 Why do large OSPF networks use a hierarchical design? (choose three)

to confine network instability to single areas of the network.

to reduce the complexity of router configuration

to speed up convergence

to lower costs by replacing routers with distribution layer switches

to decrease latency by increasing bandwidth

to reduce routing overhead

NR. 193 What is a function of TFTP in network operations?

transfers a backup configuration file from a server to a switch using a username and password

transfers files between file systems on a router

transfers a configuration files from a server to a router on a congested link

transfers IOS images from a server to a router for firmware upgrades

NR. 194 Which statement about VLAN configuration is true?

The switch must be in VTP server or transparent mode before you can configure a VLAN

The switch must be in config-vlan mode before you configure an extended VLAN

Dynamic inter-VLAN routing is supported on VLAN2 through VLAN 4064

A switch in VTP transparent mode save the VLAN databases to the running configuration only

NR. 195 If primary and secondary root switches with priority 16384 both experience catastrophiclosses, which tertiary switch can take over?

a switch with priority 20480

a switch with priority 8192

a switch with priority 4096

a switch with priority 12288

NR. 196

Refer to the exhibit. Router R2 is configured with multiple routes to reach network 10.1.1.0/24 from router R1.
Which path is chosen by router R2 to reach the destination network 10.1.1.0/24?

eBGP

statisch

OSPF

EIGRP

NO.197 Siehe dazu die Abbildung.

A company is configuring a failover plan and must implement the default routes in such a way that a floating static route will assume traffic forwarding when the primary link goes down. Which primary route configuration must be used?

ip route 0.0.0.0 0.0.0.0 192.168.0.2 GigabitEthernetl/0

ip route 0.0.0.0 0.0.0.0 192.168.0.2 tracked

ip route 0.0.0.0 0.0.0.0 192.168.0.2 floating

ip route 0.0.0.0 0.0.0.0 192.168.0.2

NR. 198 Siehe dazu die Abbildung.

Which two commands must be added to update the configuration of router R1 so that it accepts only encrypted connections? (Choose two )

username CNAC secret R!41!4319115@

ip ssh version 2

line vty 0 4

crypto key generate rsa 1024

transport input ssh

NR. 199 Siehe dazu die Abbildung.

How must OSPF be configured on the GigabitEthernet0/0 interface of the neighbor device to achieve.

Real 200-301 Dumps - Cisco Correct Answers updated on 2025 [Q181-Q199]

Understanding functional and technical aspects of 200-301 CCNA Exam: Cisco Certified Network Associate Network Fundamentals