Get Real E_S4HCON2022 Quesions Pass SAP Certification Exams Easily [Q14-Q33]

2月 24, 2023 E_S4HCON2022, サービス 0 コメント

Get Real E_S4HCON2022 Quesions Pass SAP Certification Exams Easily [Q14-Q33]

4.7/5 - (11 投票)

Get Real E_S4HCON2022 Quesions Pass SAP Certification Exams Easily

E_S4HCON2022 Dumps are Available for Instant Access

SAP S/4HANA Conversion and SAP System Upgrade Certification Exam Details:

期間	90 mins
レベル	アソシエイト
合格点	E_S4HCON2022 – 65% E_S4HCON2020 – 68%
試験コード	E_S4HCON2022
質問例	SAP S/4HANA Conversion and SAP System Upgrade Certification Sample Questions

NO.14 What are the benefits of using the benchmarking option of the DMO for SUM? Note There are 2 correct answers to this question

You can verify that the content of the download directory matches the stack XML file.

You can obtain migration duration tiles from a previous benchmark run that can be used to optimize the next runs

You can record the modification adjustment during migration and use the transports in the next runs.

You can find the optimal number of parallel H3load processes by monitoring host performance

NO.15 You are performing an S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of dictionary objects (SPDD)?
Please choose the correct answer.
反応だ：

Credentials of a named user in client 000 of the shadow system

Credentials of a named user in the development client of the development system

Credentials of user DDIC in client 000 of the shadow system

Credentials of user DDIC in the development client of the development system

NO.16 What phases of SUM will be executed during an SAP S/4HANA conversion including DMO?
There are 3 correct answers to this question.
反応だ：

Phases DIFF*

Phase DOWNCONF_DTTRANS

Phase RUN_RSPTBFIL _ISUTABU

Phases EU_IMPORT*

Phase RUN_RSDBSCPY

NO.17 Which of the following are valid options to check the progress of an inplace SUM DMO run? Note There are 2 correct answers to this question

Check the dump size of the database export on disk.

Check the Charts Control Center in the SUM Ul

Check logs for jobs starting with RSUPG_SGEN in the SAP system.

Check the log files written in the SUM directory subdirectory abap. subdirectory log

NO.18 How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
反応だ：

By searching for transport requests that are assigned to the project SAP_ADJUST

By searching for transport requests named <SID>K0<number>

By searching for transport requests in DIR_TRANS, subdirectory “transport”

By searching for transport requests in the file umodauto.Ist

NO.19 In which part of an upgrade does SUM allow you to generate ABAP loads (SGEN)?
この問題には2つの正解がある。

During downtime

During SPDD

Post-downtime

During uptime

20位 You are performing an SAP S/4HANA conversion. You are in the BIND_PATCH phase of the Configuration roadmap step. For some software components, you find entries in the Calculated level column. What does the Calculated level indicate for those software components?

The SAP support packages that will be bound to the conversion

The SAP support packages contained in the upgrade media, calculated by the maintenance planner

The SAP support packages of the support package stack, calculated by the maintenance planner

The SAP support packages in the download directory that are newer than the selected support package stack

NO.21 Regarding an SAP Upgrade, What does the major SAP Note for the version of SUM you are using usually contain?

The link to different patch levels to SUM

The corrections to the SUM Guide

An overview about possible upgrade paths

NO.22 You are preparing for a standard SAP S/4HANA conversion from SAP ECC on Windows with SAP MaxDB to SAP S/4HAN. You are performing the corresponding maintenance transaction with the Maintenance Planner. Which kernels do you need to select for the SAP S/4HANA conversion?
この問題には2つの正解がある。

Kernel for target release, Windows, SAP MaxDB

Kernel for target release, Linux, SAP HANA

Kernel for target release, Windows, SAP HANA

Kernel for source release, Windows, SAP MaxDB

NO.23 What do you need to consider when performing the SI checks for an SAP S/4HANA conversion? There are 2 correct answers to this question.

Depending on the SAP S/4HANA version, there are different SI check frameworks.

The SI checks are executed in the development system and the results are transported into the subsequent systems.

You need an SAP system based on AS ABAP 7.50 or above for the SI check framework.

You need to build up a SI check framework by applying SAP notes.

NO.24 You are upgrading a three-system landscape DEV – QAS – PRD. The upgrade project contains a Unicode conversion. You have already upgraded the DEV and the QAS system but not yet the PRD system. What do you need to consider? Please choose the correct answer.

The upgrade of the PRD must be finished before you start new development in the DEV.

The transport domain of systems DEV and QAS must differ from the transport domain of system PRD.

The transport between Unicode and non-Unicode systems is forbidden.

The upgrade of the PRD must be finished before you import any transports from the upgraded DEV system into the PRD.

25位 Which additional configuration options are offered by SUM when selecting “Switch expert mode on” in main configuration option “Standard”?
この問題には2つの正解がある。
反応だ：

Keep archiving on during the whole procedure.

Use the Near Zero Downtime Maintenance Technology (NZDM).

Reuse a profile for the shadow instance from a previous run.

Choose the instance number of the shadow instance.

NO.26 SUM was registered at the SAP Host Agent. Based on which information does the SAP Host Agent determine the path to the SUM directory.

The path was stored in file host_profile during registration

The path was stored to the environment of user <sid>adm during registration

The path is taken from the URL entered in the browser to start SUM

The path was stored in file sumabap conf during registration

NO.27 Which steps can SUM perform during an SAP S/4HANA conversion? Note; There are 2 correct answers to this question.

Unicode conversion

Custom code analysis

Database migration

Software update

NO.28 The SUM procedure stops with an error during uptime. How can you identify the current phase, the one in which SUM encountered an error?
この問題には2つの正解がある。
反応だ：

Check the most recent entries shown in file sapevt.trc

Check the system log (transaction SM21) of the SAP system

Check the messages shown by the SUM UI

Check the most recent entries in SAPup.log

NO.29 You want to execute a Unicode Conversion only. Which approach do you need to follow?
Please choose the correct answer.
反応だ：

SWPM using the Backup / Restore procedure

SUM with DMO

SUM without DMO

SWPM using the Load procedure

30位 You are performing an upgrade with SUM using DMO to an AS ABAP 7.50 based SAP system. You entered a specific number of R3Ioad processes during Roadmap step “Extraction”.
Where can you change this during the migration via the Utilities option of the SUM UI?
この質問に対する正解は2つある。
反応だ：

In SUM Phaselist

In Process Control Center

In SUM Parameters

In DMO Migration Preparation

NO.31 Which step can be optimized when you provide the MIGRATE_DT_DUR.XML file to SUM?

Shadow on target creation

Downtime conversion

Silent data migration (SDM)

Downtime migration

NO.32 You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC 6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
反応だ：

Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.

Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU &UC) procedure.

Perform the Unicode conversion before the upgrade to SAP ECC 6.08.

Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.

NO.33 You are running an SAP ECC system. For which of the following activities does SUM allow you to use the Near Zero Downtime Maintenance (NZDM) capabilities?
There are 3 correct answers to this question.
反応だ：

Apply SAP Support Packages.

Upgrade the SAP system.

Use DMO for SUM.

Apply an Enhancement Package.

Perform an SAP S/4HANA conversion including DMO.

ローディング …

SAP E_S4HCON2022 Certification Exam Topics:

Topic Areas	Topic Details, Courses, Books
Manual Activities for SUM 8% – 12%	Describe the necessary manual preparation and follow-on activities for SUM ADM328
Handling of an SAP System Landscape 8% – 12%	Describe the handling of the SAP system landscape during SAP S/4HANA conversion and SAP system upgrade ADM328
Downtime 8% – 12%	Describe the factors influencing downtime and techniques to reduce downtime ADM328
SUM Execution Part > 12%	Perform the SUM execution part, including DMO ADM328