[Q53-Q74] 301a Certification – The Ultimate Guide [Updated 2022]

Rate this post

301a Certification – The Ultimate Guide [Updated 2022]

301a Practice Exam and Study Guides – Verified By ExamsLabs

For more info read reference:

F5-301a Official Certification Site

Exam policies and FAQs

 

NO.53 The web application team requests help from the LTM Specialist to Improve the performance of their web sites that are load balanced by the F5 LTM device with a Standard Virtual Server.
Which virtual server type will improve the performance of the web application servers?

 
 
 
 

NO.54 in which Application Visibility and Reporting (AYR) profile must the SMTP profile be defined to configure notifications via email?

 
 
 
 

NO.55 In an iApp, which configuration protects against accidental changes to an application Services configuration?

 
 
 
 

NO.56 Exhibit.

– The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)
– LTM3 and LTM4 are configured in Device Group Y (Sync-Only)
– An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.
– Device GROUP X has four Traffic Groups A, B, C and D configured.
– Device Group Y has four Traffic Groups E, F, G, and H configured
– Auto Fallback IS NOT Enabled.
– Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.
The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.
What is the state of each Traffic Group on each ITM device after power is restored?
A)

B)

C)

D)

 
 
 
 

NO.57 What should the LT’M Specialist add to the virtual server?

 
 
 
 

NO.58 An LTM Specialist needs to configure a setup for antivirus scanning of HTTP traffic with an internet Contact adaption Protocol (ICAP) server.
Which two server type should be used? (Choose two.)

 
 
 
 
 

NO.59 A Client makes the request displayed below to the application server.
Which virtual server type should an LTM Specialist use to load balance based on the URI?
.

 
 
 
 

NO.60 Refer to the exhibit.

The http monitor is applied to a pool. All members are enabled. One server responds as follows.

What is the resulting status of this poo! member?

 
 
 
 

NO.61 Two LTM devices must be manually configured to restrict in the same Device Group.
What is the correct order of steps to meet this requirement?

 
 
 
 

NO.62 An LTM Specialist needs to configure a virtual server with the requirements displayed below.
Application is currently an internal HTTP application
Encrypted external user access
Links are hard for siteA example.com and need to rewritten to siteB.Example.com Which profiles must the LTM Specialist use to provide the proper functionality?

 
 
 
 

NO.63 Where does a LTM Specialist view all of the objects that are part of a deployed iApp?

 
 
 
 

NO.64 An application requires load balancing functionality. The application must be encrypted to the client.
Certain content must be manipulated by the following IRule:

Which set of profiles must be applied to the virtual server?

 
 
 
 

NO.65 Exhibit.

An LTM Specialist needs to configure VS^HTTP and VS_DB for an online shopping site. The VS HTTP passes the client requests to the webservers. The webservers query the database servers through the VS_DB. Initially, the LTM Specialist finds the database servers directly return the packets to the webservers.
which setting must be enabled for the configuration to function correctly?

 
 
 
 

NO.66 Remote office users are having performance issues with a virtual hosted on the F5 LTM. The LTM Specialist reviews the configuration for the virtual server and determine that some settings are set with default profiles.
Which profile should the LTM Specialist enable to improve virtual server performance?

 
 
 
 

NO.67 An LTM Specialist needs to force only FTP traffic, sourced from subnet 10.10.10.0/24 to virtual server 10.10.20.1 to the new FTP1 server. The following virtual servers are configured on the LTM device:
Traffic sourced from 10.10.10/24 must use the specific pool member for load balancing.
Which configuration change is needed to meet the requirements?

 
 
 
 

NO.68 An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.
which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)

 
 
 
 
 

NO.69 A custom TCP application using a single server is being migrated to the LTM device. A server is being added to the pool. The application is known to violate the TCP protocol RFC. The application currently works without error from a user perspective.
Which virtual server type is appropriate in this situation?

 
 
 
 

NO.70 A pool has four members. Ail of the servers have been designed and configured with the same application. Each client’s request can significantly the performance of the servers.
Which load balancing method should the LTM Specialist use to maintain a relatively even load across all servers?

 
 
 
 

NO.71 An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.
What is an appropriate SNAT configuration in this situation?

 
 
 
 

NO.72 A company plans to launch a huge marketing campaign and expects increase demand of their secure website. With the current virtual server setup, the LTM Specialist expects that the LTM device will reach its capacity limits. For the wen application to function properly. Cookies persistence is required. The LTM Specialist needs to reduce LTM device load without breaking the application.
Which two settings should the LTM Specialist modify to meet the requirement? (Choose two.)

 
 
 
 
 

NO.73 An LTM Specialist needs to upgrade all guests on a Viprion eight CMP guests.
What is the maximum number of guests that the LTM Specialist should upgrade at once?

 
 
 
 

NO.74 An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled.
TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool.
TLS enabled virtual servers utilize certificates based on 2048-bit keys During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.
What will happen in this scenario?

 
 
 
 

F5 301a Exam Syllabus Topics:

Topic Details
Topic 1
  • Given a scenario determine the steps required to maintain SSL certificates
  • Given a scenario, determine the minimum profiles for an application
Topic 2
  • Determine the effect of LTM features and
  • or modules on LTM device performance and
  • or memory
  • Explain the effect of configuration options and resource health on load balancing decisions
Topic 3
  • Given an iRule functionality, determine the profiles and configuration options necessary to implement the iRule
  • Given an expected traffic volume, determine the appropriate SNAT configuration
Topic 4
  • Explain how to configure remote authentication and multiple administration roles on the LTM device
  • Distinguish between the management interface configuration and application traffic interface configuration
Topic 5
  • Determine the appropriate LTM device security configuration to protect against a security threat
  • Given a scenario, determine the appropriate monitor type and parameters to use
Topic 6
  • Given an application configuration, determine which functions can be offloaded to the LTM device
  • Given a scenario, determine the appropriate load balancing method(s)

 

Ultimate Guide to the 301a – Latest Edition Available Now: https://www.examslabs.com/F5/LTM-Specialist/best-301a-exam-dumps.html