Accurate Hot Selling 300-425 Exam Dumps 2026 Newly Released [Q66-Q90]

September 2, 2026 300-425, Cisco 0 Comments

Accurate Hot Selling 300-425 Exam Dumps 2026 Newly Released [Q66-Q90]

4/5 - (3 votes)

Accurate Hot Selling 300-425 Exam Dumps 2026 Newly Released

Get 100% Authentic Cisco 300-425 Dumps with Correct Answers

Cisco 300-425 is a certification exam designed for network engineers and professionals who want to enhance their skills in designing Cisco enterprise wireless networks. 300-425 exam is a part of the Cisco Certified Specialist – Enterprise Wireless Design certification and is an essential step towards becoming a specialist in enterprise wireless network design. Designing Cisco Enterprise Wireless Networks certification validates your knowledge and skills in designing and implementing Cisco enterprise wireless networks.

Wired & Wireless Infrastructure

This subject area makes up 30% of the overall content and measures the applicants’ skills in the following:

Designing wireless networks that are high in density and their related components, including the campus, lecture halls, and conference rooms;
Designing wireless bridging, such as Ethernet bridging, modes of operation, and WGB & roaming.
Designing radio management (RxSOP, RRM, and RF profiles);

NO.66 An architect configures a set of AirOS controllers to be in the same mobility group as the existing controllers. The implementation should facilitate inter-controller roaming for users in their new campus. After the configuration, the mobility tunnel is not operational for the data path in the network. Which two validations should be performed? (Choose two.)

firewall port 16666

mping

eping

rping

firewall IP protocol 97

NO.67 An engineer is designing a new wireless network. The network needs to fulfill the following requirements:
support multimedia applications
support a high concentration of wireless clients
support data over wireless
support roaming
Which approach should be used?

use of micro cells with reduced power levels

use of macro cells with reduced power levels

coverage for cells at maximum power levels

use of macro cells with maximum power levels

NO.68 An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?

the client that has the highest RF properties

the client that is used most by the company

the client that is used least by the company

the client with the worst RF characteristics

NO.69 An engineer is designing a new wireless network for an international company. The design must have these requirements:
– broadcast wireless channels based on country regulations
– controllers to support APs for regulatory domains
– RF changes applied on APs per country that are installed
– multiple-country feature to be used on the controllers
Which design approach must be taken?

Install APs and controllers with the same license number across all offices globally.

Install APs and controllers with the same part number across all offices globally.

Create an RF group with controllers configured with the same set of countries in the random order.

Create an RF group with controllers configured with the same set of countries in the same order.

NO.70 A medium-sized hospitality company with 50 hotels needs to upgrade the existing WLAN in each hotel to
802.11n. During the site surveys for each hotel, what needs to be taken into consideration when determining the locations for each AP?

Selecting locations that are easily accessed so maintenance and upgrades can be performed quickly.

Selecting AP locations where power is already available.

Selecting APs that can be hidden in ceiling panels to provide a secure and clean aesthetic look.

Selecting locations that make visual assessment of the AP operation easy.

NO.71 An engineer is designing a new wireless network. The network needs to fulfill the following requirements:
– support multimedia applications
– support a high concentration of wireless clients
– support data over wireless
– support roaming
Which approach should be used?

use of micro cells with reduced power levels

use of macro cells with reduced power levels

coverage for cells at maximum power levels

use of macro cells with maximum power levels

NO.72 Refer to the exhibit.

An engineer determined that during a recent controller failure, some APs did not failover to their secondary controller based on the network design, which has sufficient licenses for all APs. The controllers are not in a mobility group but have A records for their hostnames in DNS. Which setting needs to be addressed?

The controllers must be in the same mobility group.

The secondary controller IP address is incorrect.

DNS hostnames are required to be FQDN.

The AP failover priority was not set high enough.

NO.73 Which antenna type is best for covering a long corridor in a building?

Omni-directional antenna

Patch antenna

Yagi antenna

Dipole antenna

NO.74 Which statement about AP failover priority for access points when configured with priority 1 or 4 is true?

When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.

When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.

When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure.

When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure.

NO.75 An engineer has successfully configured high availability and SSO using two Cisco 5508 Wireless LAN Controllers. The engineer can access the Active Primary WLC, but the Secondary Standby WLC is not accessible. Which two methods allow access to the standby unit? (Choose two.)

via the console connection

SSH to the redundancy management interface of the primary WLC

SSH to the service port interface

SSH to the virtual interface of the secondary WLC

SSH to the management interface of the primary WLC

NO.76 A network consultant is designing a wireless network for a government agency. The customer requires high security between any device communication. The design includes AireOS, Cisco IOS-XE controllers, and Cisco 4800 Series APs. Which requirement must be met to enhance the mobility group security?

Use a different group name for each mobility member.

Enable MIC authentication between the mobility group members.

Enable Mobility Encryption on the network.

Use a complex group name for the mobility group.

NO.77 An engineer is upgrading the legacy APs to 802.11ac Wave 2 capable APs. The existing gigabit uplinked switches provide 802.3at. Which switch limitation is a concern?

interface throughput

high availability

collision domains

output power

NO.78 An engineer is designing a network deployment for a college with six buildings Each building must have a WLC located in the IDF to support the APs. The wireless clients should be able to roam between the APs and the controllers. Which type of wireless architecture should be used?

Distributed

Centralized

Cloud

Autonomous

NO.79 Refer to the exhibit.

A client roams between two APs that are registered to two different controllers, where each controller has an interface in the client subnet. Both controllers are running AireOS. Which scenario explains the client roaming behavior?

Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is moved from the original controller to the new controller.

Controllers do not exchange mobility control messages (over UDP port 16666) and the client database, entry is not moved from the original controller to the new controller.

Controllers exchange mobility control messages (over UDP port 16666) and a new client session is started with the new controller.

Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is tunneled from the original controller to the new controller.

NO.80 An engineer is designing a wireless network in a historic building that has large rooms and ornate wall coverings. Which approach must be considered first when placing access points?

aesthetics

RF interference

RF coverage

cell overlap

NO.81 An enterprise network administrator is asked to set up an experimental WLAN for a collaboration project with a local service provider. The WLAN must be anchored to a WLC in the service provider data center using legacy mobility mode. After the configurations are completed on the WLCs and the firewalls in the path, the data path mobility tunnel is failing to come up. What should be performed by the administrator to debug the issue?

Establish a Telnet connection from a local PC to the firewall on port 97.

Use the mapping command on the WLC.

Establish a Telnet connection from a local PC to the firewall on port 16666.

Use the mapping command on the WLC.

NO.82 An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. What is the minimum requirement for the design?

overlapping -72 dBm coverage from two access points

continuous -67 dBm coverage from one access point

continuous -72 dBm coverage from one access point

overlapping -67 dBm coverage from two access points

NO.83 An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by location. Which type of groups can the engineer use to map the smaller subnets to the corporate WLAN?

WLC port groups

RF groups

AP groups

interface groups

NO.84 A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?

roaming design model

voice design model

location design model

high-density design model

NO.85 A company wants to replace its existing PBX system with a new VoIP System that will include wireless IP phones. The CIO has concerns about whether the company’s existing wireless network can support the new system. Which tool in Cisco Prime can help ensure that the current network will support the new phone system?

Location Readiness

Site Calibration

Map Editor

Voice Readiness

NO.86 A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco workgroup bridges until the wired network is complete. Each of 42 new users has a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?

NO.87 Guest anchoring is configured for a newly created SSID for your company. It has been noticed that the mobility tunnels are not up, and that MPING fails from your foreign WLC to the anchor WLC. What is the reason that it is failing?

A rule is needed at the firewall to allow UDP port 16666 for communication towork.

A rule is needed at the firewall to allow UDP port 97 for communication to work.

A rule is needed at the firewall to allow TCP port 97 for communication to work.

A rule is needed at the firewall to allow TCP port 16666 for communication to work.

NO.88 An engineer is designing an outdoor mesh network to cover several sports fields. The core of the network is located in a building at the entrance of a sports complex. Which type of antenna should be used with the RAP for backhaul connectivity?

5 GHz. 8-dBi omnidirectional antenna

2.4 GHz. 8-dBi patch antenna

2.4 GHz. 14-dBi omnidirectional antenna

5 GHz. 14-DBi patch antenna

NO.89 An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol.
Which protocol must the engineer select?

802.11i

802.11ac

802.11r

802.11e

NO.90 An engineer is using Ekahau Site Survey to create a WLAN plan for a warehouse The plan is to use patch antennas. Which setting is adjusted when simulated APs are placed on the map?

antenna downtilt

AP transmission power

Wi-Fi technology

AP channel

Cisco 300-425: Designing Cisco Enterprise Wireless Networks is a highly sought-after certification exam for professionals who are looking to enhance their career in wireless networking. 300-425 exam is designed specifically for IT professionals who have experience in designing wireless networks and want to validate their knowledge and skills. 300-425 exam covers a wide range of topics related to wireless networking, including designing wireless network infrastructure, implementing advanced services, and troubleshooting wireless networks.

Dumps of 300-425 Cover all the requirements of the Real Exam: https://www.examslabs.com/Cisco/CCNP-Enterprise/best-300-425-exam-dumps.html